Mitsubishi Electric Plasma Quad Connect MAC-100FT-E, Руководство по обслуживанию

Страница: 8 / 8

8
Short-circuit the jumper wire on the printed circuit board with a crocodile clip, then turn on the
power.
The LED on the printed circuit board indicates the state of the Plasma Quad Connect.
The lighting pattern of each LED is shown in the table below.
© Copyright 2021 MITSUBISHI ELECTRIC CORPORATION
Published: Apr. 2021. No. OBH901
Made in Japan Specifications are subject to change without notice.
HEAD OFFICE: TOKYO BUILDING, 2-7-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
JPS
JPG
LED71 / LED73 (White)
LED status PQC status
Lit PQC ON
Off PQC OFF
Blink Abnormal
The LED71 is placed on the display printed circuit board.
The LED71 and LED73 indicate PQC status in the same lighting pattern.
LED74 (Orange)
LED status PQC status
Blink Normal communication
Off Abnormal communication