Mitsubishi Electric PKFY-20VAM страница 15 Скачать руководство пользователя

Страница: 15 / 20

OPERATION PROCEDURE

PHOTOS & ILLUSTRATIONS

3. REMOVING THE INDOOR MICRO CONTROLLER BOARD

AND INDOOR POWER BOARD

(1) Remove the front panel (Refer to (2)).
(1) Remove the electrical box cover (screw 4

10)

(Refer to the photo 2).

INDOOR MICRO CONTROLLER BOARD
(1) Disconnect the following connectors on the indoor micro

controller board.

(connector in front of)

●

CN60, CN51, CN3, CN29, CN21

●

CN42, CN41, CN20

(2) Pull out the indoor micro controller board toward you, then

disconnect the rest of connectors.

●

CN-53-M, CN35-M (See the photo 3)

INDOOR POWER BOARD
(1) Disconnect the following connectors on the indoor power

board.

●

FAN1, CN-53-P, CN35-P

(2) Remove the screws of the indoor power board, then pull out

the indoor power board toward you. (See the photo 3)

Photo 2

Electrical parts box cover

Screw caps

Electrical parts box

Photo 3

Indoor micro controller board

Indoor power
board

4. REMOVING THE ELECTRICAL PARTS BOX

(1) Remove the front panel (Refer to (2))
(2) Remove the electrical parts box cover.
(3) Pull the nozzle assemble toward you as opening the catch

of the nozzle assemble.

(4) Disconnect the indoor/outdoor connector.
(5) Disconnect the following connector on the indoor micro con

troller board. (See the photo 4)

●

CN60, CN5V, CN33, CN29, CN21, CN20

(6) Remove the connector FAN1 on the indoor power board.
(7) Disconnect the ground wire.
(8) Pull the disconnected lead wire out from the electrical parts

box.

(9) Push up the upper fixture catch to remove the box, then pull

the lower fixture and remove it from the box fixture.

Photo 4

Indoor malti
controller board

fixture (uppre)

Indoor power
board

fixture (Lower)

Ground wire set screw

Electrical parts box

OC112--1.qxp 11/16/98 4:46 PM Page 15

Содержание PKFY-20VAM





















Результаты поиска

Содержание PKFY-20VAM

Отзывы:

Похожие инструкции для PKFY-20VAM

Бренды по названию

Популярные бренды

Mitsubishi Electric PKFY-20VAM, Техническое и сервисное руководство

Результаты поиска

Содержание PKFY-20VAM

Отзывы:

Похожие инструкции для PKFY-20VAM

Бренды по названию

Популярные бренды