10
HWE1305A
PART NAMES AND FUNCTIONS
2-3-3. Main menu list
Setting and display items
Setting details
Vane · Louver · Vent.
(Lossnay)
Use to set the vane angle.
•
Select a desired vane setting from five different settings.
Use to turn ON / OFF the louver.
•
Select a desired setting from "ON" and "OFF."
Use to set the amount of ventilation.
•
Select a desired setting from "Off," "Low," and "High."
High power
Use to reach the comfortable room temperature quickly.
•
Units can be operated in the High-power mode for up to 30 minutes.
Timer
On/Off timer
Use to set the operation On/Off times.
•
Time can be set in 5-minute increments.
* Clock setting is required.
Auto-Off timer
Use to set the Auto-Off time.
•
Time can be set to a value from 30 to 240 in 10-minute increments.
Filter information
Use to check the filter status.
•
The filter sign can be reset.
Error information
Use to check error information when an error occurs.
•
Error code, error source, refrigerant address, unit model, manufacturing
number, contact information (dealer's phone number) can be displayed.
* The unit model, manufacturing number, and contact information need to be
registered in advance to be displayed.
Weekly timer
Use to set the weekly operation On / Off times.
•
Up to eight operation patterns can be set for each day.
* Clock setting is required.
* Not valid when the On/Off timer is enabled.
Energy saving
Auto return
Use to get the units to operate at the preset temperature after performing
energy-save operation for a specified time period.
•
Time can be set to a value from 30 and 120 in 10-minute increments.
* This function will not be valid when the preset temperature ranges are
restricted.
Schedule
Set the start/stop times to operate the units in the energy-save mode for
each day of the week, and set the energy-saving rate.
•
Up to four energy-save operation patterns can be set for each day.
•
Time can be set in 5-minute increments.
•
Energy-saving rate can be set to a value from 0% and 50 to 90% in 10%
increments.
* Clock setting is required.
Night setback
Use to make Night setback settings.
•
Select "Yes" to enable the setting, and "No" to disable the setting. The
temperature range and the start/stop times can be set.
* Clock setting is required.
Restriction
Temp. range
Use to restrict the preset temperature range.
•
Different temperature ranges can be set for different operation modes.
Operation lock
Use to lock selected functions.
•
The locked functions cannot be operated.
Maintenance
Auto descending panel
Auto descending panel (Optional parts) Up / Down you can do.
Manual vane angle
Use to set the vane angle for each vane to a fixed position.
Initial setting
Main/Sub
When connecting two remote controllers, one of them needs to be
designated as a sub controller.
Clock
Use to set the current time.
Main display
Use to switch between "Full" and "Basic" modes for the Main display.
•
The default setting is "Full."
Contrast
Use to adjust screen contrast.
