Mitsubishi Electric NM-C150SD, Инструкция по установке и эксплуатации

Страница: 13 / 37

- 8 -
1. MAC Address
Enter MAC address of the product for IP input.
2. IP Address
Enter IP address to use.
3. Ethernet Adapter
In case there are several network cards, select a
card to use for the operation of Dome Network
Camera.
4. Start
Allocate input IP to the Dome Network Camera to
use. When a completion message appears on “5”
Status window in several seconds or minutes,
input completes its process. You can add
additional IPs to other devices continuously.
2.8 Getting Started
Once installed apply power to the Network Dome Camera. The Network Dome Camera will
start a configuration sequence.
[Figure 10 – OSD Position]
FASTRAX II E Vx.xxx
CAMERA TYPE xxxx
WAIT DOME SETTING.
INIT TILT ORGIN SET OK
INIT PAN ORGIN SET OK
INIT CAMERA SET OK
001 PRESET
EMPTY DATA !
T001 DOMEID:0001
W→360.0,090.0
PRESET No.
INFORMATION
DISPLAY
FUNCTION
UNDER RUNNING
CAMERA TITLE
CAMERA ID
VIEW DIRECTION
PAN & TILT ANGLE
PRESET TITLE
or AREA TITLE
[Figure 8 – IP Setting Utility]
[Figure 9 – Starting Camera OSD on CRT Monitor]