1-1. THE FOLLOWING SHOULD ALWAYS BE OBSERVED FOR SAFETY
!"#$ %&'(&')%$*%&!')
" +
,(-./012310
)"4&%5%/"# &$!'6&%&!'#$)
INSTALLATION MANUAL
ENGLISH
Required Tools for Installation
Phillips screwdriver
4
)
*
89-:;
%+
Wrench (or spanner)
:>829?;@
wrench
$?01
($?01
A$?01
$?01
Pipe cutter with reamer
MSZ-HM09/12/15NA
■
Do not install the unit by yourself (user).
& _
+
■
Follow the instructions detailed in the installation manual.
& _ 5
■
When installing the unit, use appropriate protective equipment and tools for
safety.
_
■
Install the unit securely in a place that can bear the weight of the unit.
&
_
■
Perform electrical work according to the installation manual and be sure to use
an exclusive circuit. Do not connect other electrical appliances to the circuit.
&
■
Ground the unit correctly.
6 5
6
■
Do not damage the wires.
6
■
Be sure to shut off the main power when setting up the indoor P.C. board or
wiring.
■
-
&
■
& @
■
Do not use intermediate connection of the power cord or the extension cord.
Do not connect many devices to one AC outlet.
&
■
% _
■
When plugging the power supply plug into the outlet, make sure that there is
no dust, blockage, or loose parts both in the outlet and on the plug. Verify that
the power supply plug is completely in the outlet.
&
&
■
Securely attach the electrical cover to the indoor unit and the service panel to
the outdoor unit.
If the electrical cover of the indoor unit and/or the service panel of the outdoor unit are
■
When installing, relocating, or servicing the unit, make sure that no substance
!"#$%&
@_%
&
■
Do not discharge the refrigerant into the atmosphere. Check that the refriger-
ant gas does not leak after installation has been completed. If refrigerant leaks
during installation, ventilate the room.
&
& U
■
Use appropriate tools and piping materials for installation.
%$?01 0N $22'
_
■
When pumping down the refrigerant, stop the compressor before disconnecting
the refrigerant pipes.
If the refrigerant pipes are disconnected while the compressor is running and the
■
When installing the unit, securely connect the refrigerant pipes before starting
the compressor.
&
■
' *
& U
■
Install the unit according to national wiring regulations.
■
Depending on the installation area, install a Ground Fault Interrupt (GFI) circuit
breaker.
& ( & 9(&;
could occur.
■
Perform the drainage/piping work securely according to the installation manual.
& >
damage household items.
■
%_
■
Do not install the outdoor unit where small animals may live.
&
X
CAUTION
9 _ ;
WARNING
9 _;
1. BEFORE INSTALLATION
