Mitsubishi Electric MSZ-CA25VB, Руководство по обслуживанию

Страница: 12 / 28

12
5. How to install the horizontal vanes
Upper vane
Lower vane
In procedures
2
,
3
,
5
, and
6
, lock the stoppers until they click into place.
6 5 4
3 2 1
If horizontal vanes are not installed correctly, both of the operation indicator lamps will blink.
In this case, install the horizontal vanes correctly by following the procedures
1
to
6
.
NOTE: Before installation of the horizontal vanes, disconnect the power supply plug and/ or turn off the breaker.
The holes on the
insertion ends of
the upper and lower
horizontal vanes
different shapes.
Insert this end first.
Upper right
Lower right
Insert this end first.
Stopper
Lock.
Stopper
Lock.
Lock. Lock.
In.
Insert.
Insert.
In.
INFORMATION FOR MULTI SYSTEM AIR CONDITIONER
OUTDOOR UNIT : MXZ series
Multi system air conditioner can connect two or more indoor units with one outdoor unit.
•Unit won’t operate in case the total capacity of indoor units exceeds the capacity of outdoor units. Do not
connect indoor units beyond the outdoor unit capacity.
•When you try to operate two or more indoor units with one outdoor unit simultaneously, one for the cooling and
the other for heating, the operation mode of the indoor unit that operates earlier is selected. The other indoor
units will start the operation later cannot operate, indicating as shown in the figure below. In this case, please
set all the indoor units to the same operation mode.
•When indoor units starts the operation while the defrosting of outdoor unit is being done, it takes a few minutes
(max. 10 minutes) to blow out the warm air.
•In the heating operation, though indoor unit that does not operate may get warm or the sound of refrigerant
flowing may be heard, they are not malfunction. The reason is that the refrigerant continuously flows into it.
Lighted
Blinking
Operation Indicator
OB390--1qxp 05.2.9 11:27 Page 12