Mitsubishi Electric MR-WX52D, Руководство по эксплуатации

Страница: 29 / 84

29
When attaching parts, use the backward procedures of removal.
Partition
1
Remove the glass shelf (lower)
and place it on a surface such
as a stand.
2
Press the glass shelf (lower)
down with one hand.
* The shelves are firmly installed.
3
Pull in the direction indicated by the arrow.
Be careful when attaching and removing
the glass shelf.
If it is attached improperly, it could come loose
and fall, causing injury.
Follow the
instructions
(MR-WX61Z)
1
Pull out to the front using both hands
until making contact with the tabs.
Lift the front of the shelf to remove the tabs.
2
Hold the front and back of the glass
shelf (lower) and pull the back out to
the front of the rail. Lift the front to
make the glass shelf upright.
3
Pull out the right side or left side of
the glass shelf (lower) (in the upright
position of
2
) to remove from the
refrigerator.
Pull out until making
contact
* Remove with the partition attached after you have removed
the glass shelves (upper) and (middle) and slide glass shelf.
Rail
Tab
1
2
3
2
3
Glass Shelf (Lower)
*MR-WX70C and MR-WX61Z only
(MR-WX70C)
3
Using the gap between the refrigerator compartment
and door, rotate the glass shelf (lower) and remove
from the refrigerator.
1
Lift the front of the shelf
using both hands.
2
Pull out to the front.
* Swiftly pulling out the part
to the front can damage the
side of the door. Pull out
the part slowly to remove it.
1
2
* The illustration is of the MR-WX52D.
Glass Shelf
(Lower)
1
Lift the front of the shelf using both hands.
2
Pull out to the front.
Glass Shelf (Upper) (Middle)
* The illustration is of the glass shelf (upper). Remove the
glass shelves (middle) in the same manner.
* Swiftly pulling out the part to the front can damage the
side of the door. Pull out the part slowly to remove it.
3
Using the gap between the refrigerator compartment and
door, rotate the glass shelf (upper) and remove from the
refrigerator.
1
2
1
Align the protruding parts at the front and back of the
slide glass shelf (front) with the grooved parts, and then
remove this shelf.
Slide Glass Shelf (Front) (Back)
Protruding
part
3
Hold the front and back of
the slide glass shelf (back)
and pull out this shelf while
lifting its front.
4
Maintaining the state from step
3
,
pull out the slide glass shelf (back)
one side at a time to remove it
from the refrigerator.
Grooved
part
Grooved
part
Protruding
part
1
2
3
4
2
While lifting the slide glass shelf (back) with both
hands, pull it to the front, align the protruding parts
with the grooved parts, and then remove this shelf.
Cleaning