En-4
• Make sure the polarity of the batteries is correct.
• Do not use manganese batteries. The remote controller could malfunction.
• Do not use rechargeable batteries.
• Replace all batteries with new ones of the same type.
• Batteries can be used for approximately 1 year. However, batteries with
expired shelf lives last shorter.
Before operation:
Insert the power supply plug into the power outlet and/or
turn the breaker on.
Installing the remote controller batteries
P
REPARATION BEFORE OPERATION
RESET
CLOCK
1.
Remove the front lid
2.
Insert AAA
alkaline batteries
3.
Install the front lid
• Press RESET and CLOCK gently using a thin stick.
If the RESET button is not pressed, the remote
controller may not operate correctly.
RESET
CLOCK
1.
Press RESET
2.
Press CLOCK
4.
Press CLOCK again
3.
Press the TIME buttons to set the
time
Each press increases/decreases
time by 1 minute (10 minutes
when pressed longer)
Setting current time
Changing temperature units (ºF/ºC)
1.
Press RESET while
the temperature but-
tons are pressed.
• Press RESET gently using a thin stick.
The preset unit is ºF.
