Mitsubishi Electric MR-J5 Series, Руководство пользователя

Страница: 177 / 316

6 OPTIONS AND PERIPHERAL EQUIPMENT
6.11 Power factor improving AC reactor
175
6
6.11
Power factor improving AC reactor
The following shows the advantages of using power factor improving AC reactor.
• It improves the power factor by increasing the form factor of the servo amplifier's input current.
• It decreases the power supply capacity.
• The input power factor is improved to about 80 %.
When using power factor improving AC reactors for two servo amplifiers or more, connect a power factor improving AC
reactor to each servo amplifier. If one unit of power factor improving reactor is used for multiple servo amplifiers, the power
factor cannot be improved sufficiently unless all servo amplifiers are operated.
200 V class [G] [A]
*1 Use this for grounding.
*2 For FR-HAL-0.4K to FR-HAL-1.5K, the W dimension is "W ± 2".
*3 For 1-phase 200 V AC to 240 V AC, connect the power supply to L1 and L3. Leave L2 open.
*4 Maximum dimensions. The dimensions vary depending on the curvature of the input/output lines.
Servo amplifier Power factor
improving
AC reactor Dimensions [mm] Terminal
size Mass [kg]
W W1 H D
*4
D1 D2 d
MR-J5-10_
MR-J5-20_ FR-HAL-0.4K 104 84 99 72 51 40 M5 M4 0.6
MR-J5-40_ FR-HAL-0.75K 104 84 99 74 56 44 M5 M4 0.8
MR-J5-60_
MR-J5-70_ FR-HAL-1.5K 104 84 99 77 61 50 M5 M4 1.1
MR-J5-100_
(3-phase power
supply input) FR-HAL-2.2K 115
*4
40 115 77 71 57 M6 M4 1.5
MR-J5-100_
(1-phase power
supply input)
MR-J5-200_
(3-phase power
supply input) FR-HAL-3.7K 115
*4
40 115 83 81 67 M6 M4 2.2
MR-J5-200_
(1-phase power
supply input) FR-HAL-5.5K 115
*4
40 115 83 81 67 M6 M4 2.3
R X Z S Y T
W1
D1
D2
H
Y
Z
S
T
MC MCCB
FR-HAL
X R
L1
L2
L3
L1
L2
L3
Y
Z
S
T
MC MCCB
FR-HAL
X R
Servo amplifier
3-phase 200 V class
Terminal assignment
4-d mounting hole
(Varnish is removed only from bottom right
(face and back side))
*1
3-phase
200 V AC to 240 V AC
D or less
Servo amplifier
1-phase 200 V class
1-phase
*3
200 V AC to 240 V AC
W or less
*2