66
1 SERVO PARAMETER DETAILS
1.4 Extension setting servo parameters group ([Pr. PC_ _ ])
[Pr. PC09_Analog monitor 1 output (MOD1)]
[Pr. PC09.0-1_Analog monitor 1 output selection]
Select the signal to be output to analog monitor 1. For multi axis servo amplifiers, this servo parameter setting is disabled.
*1 Items with are available for each operation mode.
Rotary: When rotary servo motors are used.
Linear: When linear servo motors are used.
DD: When direct drive motors are used.
*2 This is in the units of encoder pulses.
Initial value
Setting range
Setting method
Ver.
00000000h
Refer to the relevant detail No.
Common
Refer to the relevant detail No.
Initial value
Setting range
Ver.
00h
Refer to the text
C4
Setting
value
Explanation
Fully closed loop system
Rotary
Linear
DD
Rotary
00
Servo motor speed (±8 V/max. speed)
01
Torque or thrust (±8 V/max. torque or max. thrust)
02
Servo motor speed (+8 V/max. speed)
03
Torque or thrust (+8 V/max. torque or max. thrust)
04
Current command (±8 V/max. current command)
05
Speed command (±8 V/max. speed)
06
Servo motor-side droop pulses (±10 V/100 pulses)
07
Servo motor-side droop pulses (±10 V/1000 pulses)
08
Servo motor-side droop pulses (±10 V/10000 pulses)
09
Servo motor-side droop pulses (±10 V/100000 pulses)
0D
Bus voltage (200 V class: +8 V/400 V, 400 V class: +8 V/800 V)
0E
Speed command 2 (±8 V/max. speed)
10
Load-side droop pulses (±10 V/100 pulses)
11
Load-side droop pulses (±10 V/1000 pulses)
12
Load-side droop pulses (±10 V/10000 pulses)
13
Load-side droop pulses (±10 V/100000 pulses)
14
Load-side droop pulses (±10 V/1 Mpulses)
15
Motor/load side position deviation (±10 V/100000 pulses)
16
Motor/load side speed deviation (±8 V/max. speed)
17
Internal temperature of encoder (±10 V/±128
˚
C)
18
Servo motor-side droop pulses (±10 V/1 Mpulses)
Содержание MR-J5-B
Страница 1: ...MR J5 B MR J5W B User s Manual Parameters MR J5 _B_ MR J5W_ _B_ Mitsubishi Electric AC Servo System ...
Страница 2: ......
Страница 153: ...4 SERVO PARAMETER SETTING METHOD 4 2 Controller 151 4 MEMO ...
Страница 157: ......