MR-385S-A
MR-385SL-A
MR-420S-A
MR-455S-A
MR-385S-A(NZ) MR-385SL-A(NZ) MR-420S-A(NZ) MR-455S-A(NZ)
Unplug the power cord before prepairing and servicing
1. Remove parts insider the Freezer room
(1) Photo 1st Remove Crystal shelf Freezer,
Fan Grille
(2) Photo 2nd Remove scews for closing Lead cover F,
Remove 2 Rivets From Fan grille
(3) Photo 3rd Cut binder, remove poly bag, Take off
connector lead wire.
Fan motor
(4) Photo 4th Remove Fan motor after remove fan and
remove screw out of fan motor base.
Defrost thermal fuse and Freezer thermistor
(5) Photo 4th Remove fan grille out of bell mouth,
removethe connector and plug to take out the thermal
fuse and thermistor freezer.
Defrost heater and Drip tray
(6)
heaterout of base after remove heater cover plate and
drip tray
Caution on assembly
(7) 1. Insert the fan into the base of fan motor's shaft,
check if the fan rotates with your finger.
2. When inserted drip tray to effect to slacken the
lead wire of defrost heater in order to prevent water
from entering the glass tube.
3. Attach defrost thermistor with muffler and lighten
the binder.
- 20 -
PHOTOS
DISASSEMBLY INSTRUCTIONS
Photo 5th Lift up evaporator and remove the defrost
Ice corner tray assy, Ice tray, Ice box
7
OPERATING PROCEDURE
Photo 1
Photo 5
Photo 2
Photo 3
Photo 4
Crystal shelf F
Ice box
Ice corner tray assy
Ice tray
Screw
Lead cover F
Rivets
Binder
Bag
Connector lead wire
Fan motor
Fan grille
Evaporator
Defrost heater
Def thermistor
Heater cover
Drip tray
Screw
Bell mouth
Thermal fuse