background image

4

Meanings of the graphic symbols used in this manual and on 

the unit are explained below.

Precautions

Precautions

Forbidden

Keep away 
from fi re

Do not 
subject to 
water

Do not 
disassemble

Always 
follow the 
instructions

The following diagrams indicate circumstances 
where danger can result from mishandling the unit.

WARNING

CAUTION

Mishandling may result in 
fatal or serious injuries.

Mishandling may result in 
injuries or damage to your 
home or property, etc.

Do not damage or modify the power 
cord or plug. Do not use power sockets 
in which the plug fi ts loosely.

Do not modify, bundle, twist, bend or heat the power 
cord. Do not place under objects or use with the end 
close to the plug bent.
(Keep pets from biting the cord.)

The cord may be damaged 

resulting in fi re, 

electric shock or heat generation

Do not plug many power cords 
into one power socket.

This may 

result in fi re, electric shock or 

malfunctions

.

Do not start/stop the unit by 
plugging/unplugging the power cord.

This may 

result in fi re and/or electric shock

.

To prevent the temperature inside the unit from 
rising, the blower fan rotates for approximately 
2 minutes after the power button is turned off. 
Remove the power plug after the blower fan 
has stopped. 

Do not put the unit near heat-
generating devices (such as 
stoves, fan heaters, 

etc.).

The plastic parts may melt and 

cause fi re

.

Do not put your fi ngers 
or any long object, into 
the air intake/outlet. 
Do not touch the swing 
louver. 

The internal fan rotates at high speeds, 
and such actions may 

result in injury or 

malfunctions.

Do not attempt to repair, 
disassemble, or modify 
the unit.

This may 

result in fi re and/or electric shock

Refer servicing to your dealer or Mitsubishi 
Electric Service Centre.

Exclusively use 220V AC power 
sockets for the power supply. 

Failing to do so may 

result in fi re and/or 

electric shock

∗ 

Use an extension cord by itself.

Wipe dust off the power plug and 
insert the plug fi rmly.

If the plug is not fully inserted into the socket, 
dust may gather on the connectors which may 

cause fi re and/or electric shock

.

Should abnormal symptoms occur (a 
burning smell, etc.), switch off the unit 
and unplug it from the socket.

Continuing to operate the unit may 

result in 

fi re, electric shock, or malfunctions

Contact your dealer or Mitsubishi Electric 
Service Centre for consultation.

Remove water that has collected in 
the tank.

Accidentally drinking the water or using it for 
other purposes may 

cause illness and/or 

unforeseen accidents

.

WARNING

e̲mj̲ez6cx̲h.indb   4

e̲mj̲ez6cx̲h.indb   4

2008/10/16   16:10:07

2008/10/16   16:10:07

Содержание MJ-EZ6CX-H



























Отзывы: