background image

After switching the unit off, leave for one day until
any water inside has had time to run off, then carry
out the following steps.

1

Perform drying inside

Performing drying inside to prevent mildew
growth is recommended.

2

Bundle
power cord.

3

Remove the
drainage
water.

Empty the water tank and
wipe away any remaining
drops of water.

4

Clean the
pre-filter.

Remove grit with
vacuum cleaner

5

Store the unit.

• When you are sure that all parts of the

unit are dry, cover it with a cloth to keep
it from dust.

• Store the unit in an upright position in a

place not exposed to direct sunlight.

E

Detach the case from the unit and
replace the cartridge.
Only replace the cartridge. Do no throw
away the case.

For maintenance procedures see

Remove the front panel and pre-filter to
replace the silver ion filter.

For maintenance procedures see

25

Tr

oub

leshooting

Replacing
Consumable Parts

The silver ion filter and supplement cartridge
become depleted over time.

Replace them when necessary. The dehumidifier can
still operate without replacing the supplement
cartridge. Replace as desired.

Storage and
Disposal

Storage

21

10

Silver ion filter for replacement

Type: MJPR-10WXFT

Type code: 5C5 818

Replacement supplement cartridge

Type: MJ-E100SPL

(This contains the same content as 
KD-E100SPL.)

Type code: 5C7 810

For these items contact your nearest Mitsubishi
Electric dealer.

Parts sold separately

Replacing the silver ion filter

Although the silver ion filter lasts roughly 2
years, replace it when:

¡

You have soaked the filter 8 times.

¡

The silver ion filter has turned brown due to
cigarette smoke or black with dust.

Life of the silver ion filter differs on usage and
environmental conditions.

11

Replacing the supplement cartridge

Replace after 6 months.

17

23

When disposing the unit

Dispose according to the garbage regulations in
your district.

¡

Silver ion filter
Material: PET and PS

¡

Supplement cartridge
Material: PP

Do not disassemble. Dispose as plastic waste.

¡

Unit

Do not disassemble. Dispose according to the
garbage regulations in your district.

e_mj_e80dx_h(20_28)_e33.qx  8/27/56 23:28  Page 25

Содержание MJ-E80DX-H





























Отзывы: