Mitsubishi Electric MELSOFT FR Configurator2, Инструкция по эксплуатации

Страница: 166 / 230

165
3. FUNCTION
3.9 Test Operation
1
2
3
4
5
6
7
8
9
10
The connected inverter's operation mode can be verified in the operation mode indicator.
NOTE
• Some operation modes cannot be switched according to the present operation mode and parameter settings. For example,
the initial setting does not allow switching between the PU operation mode and the Network operation mode. (For the details,
refer to the Instruction Manual of the inverter.)
3.9.3 Specifying the running frequency (rotation speed,
machine speed)
Input a desired frequency (rotation speed, machine speed) to the frequency (speed) input section and press the [Setting] button
to write the set frequency to the inverter. To increase or decrease a read setting frequency in minimum setting increments, use
the buttons at the right side of the input section.
Switches to the PU
operation mode.
Switches to the External
operation mode.
Switches to the Network operation mode.
Operation mode indication
Increase/decrease the frequency
(rotation speed, machine speed)
in minimum increments.
A B
Symbol Name Function/description
A Frequency setting
Frequency/
rotation speed/
machine speed
Appears in the following situations.
• When offline
• When the selected station's set frequency unit is other than the frequency,
rotation speed, and machine speed.
• When the set frequency information acquisition fails.
Frequency
Appears when the frequency (Hz) has been set as the set frequency unit for
the selected station.
Rotation speed
Appears when the rotation speed (r/min) has been set as the set frequency unit
for the selected station.
Machine speed
Appears when the machine speed has been set as the set frequency unit for
the selected station.
B Setting Set the set frequency.