Mitsubishi Electric MELSERVO-J4 series, Инструкция по эксплуатации

Страница: 383 / 646

11 OPTIONS AND PERIPHERAL EQUIPMENT
11.7 MR Configurator2
381
11
11.7
MR Configurator2
The MR-J4-_GF_ servo amplifier is supported with software version 1.49B or later.
MR Configurator2 (SW1DNC-MRC2-_) uses the communication function of the servo amplifier to perform parameter setting
changes, graph display, test operation, etc. on a personal computer.
Specifications
*1 The motor-less operation cannot be used in the fully closed loop control mode, linear servo motor control mode, or DD motor control
mode.
*2 This is available in the standard control mode, fully closed loop control mode, and DD motor control mode.
*3 This is available only in the fully closed loop control mode.
*4 This is available only in the linear servo motor control mode.
*5 This is available only in the I/O mode.
Item Description
Project Create/read/save/delete project, system setting, and print
Parameter Parameter setting
Monitor Display all, I/O monitor, graph, and ABS data display
Diagnosis Alarm display, alarm onset data, drive recorder, no motor rotation, system configuration, life diagnosis, machine diagnosis, fully
closed loop diagnosis
*3
, and linear diagnosis
*4
Test operation JOG operation
*2
, positioning operation, motor-less operation
*1
, DO forced output, program operation, test mode information,
and single-step feed
*5
Adjustment One-touch tuning, tuning, and machine analyzer
Others Servo assistant, parameter setting range update, switch display language, and help display