Mitsubishi Electric MELSEC Q80BD-J71GF11-T2, Руководство пользователя

Страница: 50 / 248

48
4 PROCEDURE BEFORE OPERATION
4.5 Tests Before Wiring (Standalone Tests of the Board)
Hardware test
Hardware test checks the hardware in the CC-Link IE Field Network board. The following shows a procedure for performing a
test.
Operating procedure
Operation during hardware test
Do not access the buffer memory in user program during the hardware test. Doing so may cause the test to
fail.
• Normal completion
• Abnormal completion
3.
The result is displayed on "Test Result" field.
If the test completes abnormally, please consult your local
Mitsubishi representative.
1.
Select a board to be tested on the "Board Diagnostics"
screen in CC IE Field Utility (

Page 117 Diagnosing
Board).
2.
Set Mode to "H/W Test" and click the [Start Test] button.
• Normal completion
• Abnormal completion
3.
The result is displayed on "Test Result" field.
If the test completes abnormally, please consult your local
Mitsubishi representative.