Mitsubishi Electric MELSEC iQ-RX40NC6B, Руководство пользователя приложения

Страница: 204 / 228

202
APPX
Appendix 8 Safety I/O Signals
APPENDICES (SIL2 MODE)
Appendix 8
Safety I/O Signals
List of safety I/O signals
This section shows a list of safety I/O signals for the I/O module with diagnostic functions in SIL2 mode.
For details on the safety I/O signals, refer to the following.
 Page 204 Safety input signal details

Page 204 Safety output signal details
• The safety I/O numbers (SA\X/SA\Y) listed in the following tables are the safety I/O numbers when 0 is set
as the start number with the safety data transfer device setting in the safety communication setting window.
• Do not use the "use prohibited" signals in the following tables since they are used by the system. If users
use (turn on) the signals, the functions of the I/O module with diagnostic functions cannot be guaranteed.
Input module with diagnostic functions
■
Safety input signal
■ Safety output signal
Device number Signal name
SA\X0 Safety input signal X0
SA\X1 Safety input signal X1
SA\X2 Safety input signal X2
SA\X3 Safety input signal X3
SA\X4 Safety input signal X4
SA\X5 Safety input signal X5
SA\X6 Safety input signal X6
SA\X7 Safety input signal X7
SA\X8 Safety input signal X8
SA\X9 Safety input signal X9
SA\XA Safety input signal XA
SA\XB Safety input signal XB
SA\XC Safety input signal XC
SA\XD Safety input signal XD
SA\XE Safety input signal XE
SA\XF Safety input signal XF
Device number Signal name
SA\Y0 to SA\YF Use prohibited