Mitsubishi Electric MELSEC iQ-RX40NC6B, Руководство пользователя приложения

Страница: 104 / 228

102
APPX
Appendix 3 Buffer Memory
Output delay function enable/disable
Set whether to enable or disable the output delay for each output. This setting is disabled when the synchronization function
is used.
■ Buffer memory address
The following table shows the buffer memory address of this area.
■
Enabling the setting
Turn on and off 'Operating condition setting request' (Y12) to enable the setting.
■ Default value
The default value is set to 0 (Disable) for all the outputs.
Output delay type setting
Set the output delay type for each output.
When a value other than the above is set, the output delay type setting error (error code: 1A2  H) occurs.  indicates the
number of an I/O terminal in which the error has occurred. (  = 0H to FH)
■
Buffer memory address
The following table shows the buffer memory address of this area.
■
Enabling the setting
Turn on and off 'Operating condition setting request' (Y12) to enable the setting.
■
Default value
The default value is set to 0 (OFF delay) for all the outputs.
(1) 0: Disable, 1: Enable
Buffer memory name Y0 to YF
Output delay function enable/disable 1808
Setting value Description
0 OFF delay
1 ON delay
Buffer memory name Y00 Y01 Y02 Y03 Y04 Y05 Y06 Y07 Y08 Y09 Y0A Y0B Y0C Y0D Y0E Y0F
Output delay type setting 1812 1813 1814 1815 1816 1817 1818 1819 1820 1821 1822 1823 1824 1825 1826 1827
Y00
(1)
Y01 Y02 Y03 Y04 Y05 Y06 Y07 Y08 Y09 Y0A Y0B Y0C Y0D Y0E Y0F
b0 b1 b2 b3 b4 b5 b6 b7 b8 b9 b10 b11 b12 b13 b14 b15