Mitsubishi Electric MELSEC iQ-R RD75P4, Руководство пользователя

Страница: 486 / 598

484
12 DATA USED FOR POSITIONING CONTROL
12.9 Interrupt Setting
12.9
Interrupt Setting
[Md.65] Interrupt factor detection flag
This area stores the detecting status of an interrupt factor.
■
Buffer memory address
For the buffer memory address of this area, refer to the following.

Page 378 Interrupt setting
[Cd.50] Interrupt factor mask
Set the interrupt factor mask.
■
Buffer memory address
For the buffer memory address of this area, refer to the following.
 Page 378 Interrupt setting
■ Default value
The default value is 0: Mask.
[Cd.51] Interrupt factor reset request
Perform the interrupt factor reset request.
• The interrupt factor is reset by setting 1: Reset request for this area.
• When the interrupt factor reset request acceptance is completed, 0: No reset request is automatically stored. Storing 0
indicates the completion of the interrupt factor reset request.
■
Buffer memory address
For the buffer memory address of this area, refer to the following.

Page 378 Interrupt setting
■ Default value
The default value is 0: No reset request.
Interrupt factor detection flag Stored value
Interrupt factor not detected 0
Interrupt factor detected 1
Interrupt factor mask Setting value
Mask (disable interruption) 0
Clear mask (enable interruption) 1
Interrupt factor reset request Setting value
No reset request 0
Reset request 1