Mitsubishi Electric MELSEC iQ-R CC-Link IE TSN, Руководство пользователя

Страница: 118 / 330

116
2 PARAMETER SETTINGS
2.4 Application Settings
1.
Select "0000: RJ71GN11-T2 (Master Station) [RX/RWr]" for "Transfer Source Module" and "0020: RJ71GP21-SX
(Normal Station)" for "Transfer Destination Module", and enter the transfer ranges of link devices.
2.
Click the [OK] button.
If the transfer destination network module is on a network other than CC-Link IE TSN, set the transfer
destination link devices within the own station send range of the network module. If the link devices are set
within the send range of another station, the transferred data are overwritten with the send data of another
station.
Co-recording Setting
Set whether to relay a co-recording trigger.
By changing the co-recording setting of the master station or local stations, the range of co-recording on the network can be
changed.
For details on the co-recording setting, refer to the following.

MELSEC iQ-R System Recorder Co-recording Function Reference Manual
Setting the time synchronization is recommended to ensure that the reference time (JST) of the recording
data among the multiple devices are the same. (

Page 75 Time synchronization)
Item Description Setting range
Co-recording Setting Set whether to send/receive a co-recording trigger among own station and other stations on the same
network. Even when the parameter is set to "Not Use", a co-recording trigger received from another
station is sent to other stations. • Not Use
• Use
(Default: Not Use)
0
1000
0
LB RX
Set this within its own
station send range of
the network module.
Own station send range
Other station send range
Master station
(station No.0)
Network module
1000 to 103F
0 to 3F