Mitsubishi Electric MELSEC iQ-F FX5UC Series, Руководство пользователя

Страница: 93 / 282

5 CPU MODULE PERFORMANCE SPECIFICATIONS
5.3 Input Specifications
91
5
*1 Area-specific model
*2 When capturing pulses of a response frequency of 50 to 100kHz for FX5S/FX5UJ CPU modules or 50 to 200kHz for FX5U/FX5UC CPU
modules, refer to  Page 181 When capturing high-speed pulses.
*3 When using this product in an environment with much noise, set the digital filter.
*4 For a connector type module, keep the DISP switch on the IN side.
Input response time
(Delay time of the hardware filter) • X0, X1, X3, X4
On: 5

s or less
Off: 5

s or less
• X2, X5, X6, X7
On: 30

s or less
Off: 50

s or less
• X10 to X17
On: 50

s or less
Off: 150

s or less
• X20 or later
On: Approx. 10ms
Off: Approx. 10ms
FX5U-32M  :
• X0 to X5
On: 2.5

s or less
Off: 2.5

s or less
• X6 to X17
On: 30

s or less
Off: 50

s or less
FX5U-64M  , FX5U-80M  :
• X0 to X7
On: 2.5

s or less
Off: 2.5

s or less
• X10 to X17
On: 30

s or less
Off: 50

s or less
• X20 or later
On: 50

s or less
Off: 150

s or less
FX5UC-32M  :
• X0 to X5
On: 2.5

s or less
Off: 2.5

s or less
• X6 to X17
On: 30

s or less
Off: 50

s or less
FX5UC-64M  , FX5UC-
96M  :
• X0 to X7
On: 2.5

s or less
Off: 2.5

s or less
• X10 to X17
On: 30

s or less
Off: 50

s or less
• X20 or later
On: 50

s or less
Off: 150

s or less
Input response time
*3
(Digital filter setting value)
X0 to X17: None, 10

s, 50

s, 0.1ms, 0.2ms, 0.4ms,
0.6ms, 1ms, 5ms, 10ms (default), 20ms, 70ms
X20 or later: Not supported
None, 10

s, 50

s, 0.1ms, 0.2ms, 0.4ms, 0.6ms, 1ms,
5ms, 10ms (default), 20ms, 70ms
Input signal format (Input sensor
form) No-voltage contact input
Sink: NPN open collector transistor
Source: PNP open collector transistor
Indication of input operation LED turns on when input is on. LED turns on when input is
on.
*4
Item Specifications
FX5S FX5UJ FX5U FX5UC