Mitsubishi Electric ME96SSHA-MB, Руководство пользователя

Страница: 24 / 70

3. Setting
23
3.5. Setting Menu 4 :
LCD Settings (Setting Model Display, Version Display, Backlight, and
Display Update Time)
This section is for confirming the model and the product version, and also set the backlight and the display update time.
In
the operation mode, press + simultaneously for 2 seconds or more, and the following operation becomes
available.
SET RESET
SET DISPLAY
SET DISPLAY
SET
SET DISPLAY
Set the setting
menu number to “4”.
(as shown in the right figure)
Setting menu
The display update time for the measured value can be change.
If the display switches too quickly for you to read the displayed
value, set it to 1.0 second.
(Normally, leave this setting to 0.5 second.)
0.5 second 1 second
⑤
Display update
time
The backlight can be set to continuous on (HoLd)
or auto off (Auto).
④
Backlight auto off
Auto HoLd
<When auto off (Auto) is selected>
No button operation for 5 minutes
→
the backlight turns off
Button operation during off (Note)
→
the backlight turns on
for 5 minutes
Note: When the backlight is off, pressing any
button once does not switch the display but only
turns on the backlight.
Pressing any button again switches the display.
(Auto off) ( Continuous on)
The backlight brightness can be adjusted.
③
Backlight brightness
1 2 3 4 5
Dark Bright
The product version can be checked.
(The product version is displayed, but cannot be changed.)
②
Version display
The model can be confirmed. (This is only display, and settings cannot be changed.)
（
1
）
Middle Line
Model
ME96SSEA-MB
①
Model Display
According to the setting flow (page 14), save the changed
contents, or continue to the other setting menu.
Setting Menu
SET DISPLAY
SET DISPLAY