16
Replace the filters with new ones when the time for replacement is reached.
Replacing the HEPA filter and activated
charcoal filter
Rough guide on replacement timing
z
When the Replace Filter lamp lights up
The lamp lights up after approximately 8 years with “Silent”
manual operation and approximately 1.6 years with “Turbo”
manual operation.
z
When the HEPA filter becomes very dirty and omits
bad odors
z
When odors cannot be removed from the activated
charcoal filter after soaking and washing it
Turn OFF the operation On/Off switch, disconnect the
power plug, and check that the blower fan is stopped
before replacing filters.
1
Empty the dust box.
P.14
2
Remove the HEPA filter and
activated charcoal filter and then
install new ones.
P.8
3
Insert the power plug and then reset
the Replace Filter lamp.
Press until you
hear the “blip,
blip blip” sounds
(approx. 3
seconds).
z
The Replace Filter lamp goes out.
(The lamp is reset.)
z
The life of the HEPA filter and activated charcoal
filter differs depending on operating environment and
conditions of use.
z
When replacing the HEPA filter, also replace the
activated charcoal filter at the same time.
z
The HEPA filter cannot be reused even if it is washed. When
it becomes dirty, be sure to replace it with a new one.
z
In the following cases, odors may adhere to the HEPA filter
and main unit. Clean the main unit and replace the HEPA filter.
• When a lot of cigarettes are smoked
• When there are a lot of odors in the room
Disposal
Dispose of the filters and main unit in accordance with the
local regulations on disposal.
z
HEPA filter
Materials: PP (polypropylene), rayon, and PET
(polyethylene terephthalate)
z
Activated charcoal filter
Materials: Activated charcoal, PET (polyethylene
terephthalate), and PS (polystyrene)
z
Main unit
Dispose of the main unit in accordance with the local
regulations on disposal without disassembling it.
Consumable parts
Replacement of Filters and Disposal
z
Replacement filter set
• Two-layer HEPA filter
• Special washable activated charcoal filter
z
Model
MAPR-863HFT
z
Model code 5D4 821
Purchase from the retail store where you purchased the product.
<When you wish to purchase a filter separately>
When only one of the filters is dirty or damaged or odor cannot be
removed from it
z
Replacement two-layer HEPA filter
z
Service part number
M25 410 349
z
Replacement special washable activated
charcoal filter
z
Service part number
M25 413 349
Purchase from the retail store where you purchased the product.
* The sales channels differ so the price of just one filter is
relatively high.
ma-e85r-e_cs55.indb 16
2020/10/13 10:40:29
Содержание MA-E85R-E
Страница 19: ...19 E Troubleshooting Note ma e85r e_cs55 indb 19 2020 10 13 10 40 29 ...
Страница 39: ...19 ES Solución de problemas Notas ma e85r e_cs55 indb 19 2020 10 13 10 40 42 ...
Страница 59: ...19 IT Risoluzione dei problemi Nota ma e85r e_cs55 indb 19 2020 10 13 10 40 56 ...
Страница 79: ...19 Dépannage FR Remarque ma e85r e_cs55 indb 19 2020 10 13 10 41 09 ...