36
1
Remove the two louver motor assemblies.
→ (See “(1
0) Removing and Replacing Two
Louver Motor Assemblies”.)
2
Remove the top panel from the two left tabs and
two right tabs mounting it.
→ (Removing the Top Panel)
1
Remove the top panel.
→ (See “(1
1) Removing the Top Panel”.)
2
Disengage the two joints and two tabs inside
the top panel and remove the LED circuit board
case while outwardly opening the ribs on both
sides that mount the case.
3
Remove the LED circuit board mounting screw,
and then remove the LED circuit board from the
three tabs of the LED circuit board case.
→ (Removing and Replacing the LED Circuit
Board)
Tab
Top panel
2
(11) Removing the Top Panel
(12) Removing and Replacing the LED Circuit Board
Tab
2
Top panel
2
2
Inside of
top panel
LED circuit
board case
Tab (inserted)
Joint
2
LED circuit board case
Rib on both sides
3
LED circuit board mounting screw
LED circuit board
Tab (3 places)
LED circuit board case
