Vertical machining center
Tapping center Horizontal machining center
Gantry-type machining center
5-axis control machine
13
14
ENHANCED MACHINING CENTER SYSTEM
ENHANCED MACHINING CENTER SYSTEM
CNC-dedicated CPU is incorporated
in the M800/M80 Series, providing
significantly improved short segment
processing capability. The benefits are
not limited to improvements in basic
performance alone. The Tolerance
Control function enables operators to
achieve high-quality surfaces simply
by specifying the desired dimensional
accuracy. This feature takes machining
to a whole new level.
High productivity and
high quality are our
primary focus
M800/M80 Series provides new
features that can maximize the full
potential of machine tools, including:
Variable-acceleration pre-interpolation
acceleration/deceleration provides
optimized acceleration, with each axis'
characteristics fully exercised. For
example, allowing a linear axis to
accelerate irrespective of rotary axis
responsiveness.
"OMR-FF control" allows for optimal
position loop gain adjustment suited to
each axis, leading to smoother and
more accurate cutting.
Other than the above, this CNC has
new functionality effective for higher
productivity, including "Rapid traverse
block override function" that helps
reduce non-cutting time by overlapping
feed blocks.
M800/M80 Series brings
out the full potential
of machine tools
The SSS control function provides
smoother surfaces at higher speeds and
the inclined surface machining control
function makes it possible to issue
normal program commands to an
arbitrary plane (inclined surface) in space.
These and various other features are
incorporated in the M80 Series.
Necessary features are
available on your
machine. M80 Series
includes SSS control and
inclined surface
machining features.
Tolerance control function provides a smooth motion within specified error tolerances.
Desired machining results can be achieved using simple parameter adjustment.
"Variable-acceleration pre-interpolation acceleration/deceleration"
optimizes the acceleration in accordance with the axis motion.
"OMR-FF control" makes servo control smoother and more accurate,
enabling optimal position loop gain adjustment suited to each axis.
Rapid traverse block overlap function makes it possible to reduce non-cutting time.
The overlap varies according to the path to keep the tolerance constant.
M 8 0 0 / M 8 0 S e r i e s o f f e r s S S S
4th-generation (SSS-4G) control,
enabling high-speed, high-accuracy,
high-quality machining. SSS-4G
control provides features that are
effective in reducing tact time, including
optimal acceleration/deceleration
suited to each axis' characteristics. In
addition, SSS-4G is capable of
reducing machine vibration during
high-speed cutting.
SSS-4G control allows for greater
cutting accuracy in the same length of
time, or shorter cutting time with the
same degree of accuracy when
compared to our previous models.
High-speed, high-accuracy,
high-quality cutting
through SSS-4G control
ENHANCED MACHINING
CENTER SYSTEM
SSS control has further evolved, realizing high-speed, high-accuracy, high-quality machining.
In addition, this CNC offers features that bring out the full potential of each axis and minimize non-cutting time,
leading to higher productivity.
M800W
M800S
M80
M800W
M800S
M800W
M800S
M80
M800W
M800S
M80
High
Low
Long
Short
6min 34sec
5min 46sec
6min 37sec
Machining accuracy
Machining time
SSS control
SSS-4G control
Large
tolerance
5min 15sec
Medium
tolerance
5min 46sec
Small
tolerance
6min 34sec
32min 48sec
29min 30sec
Speed
Time
Acceleration
Speed
Time
Acceleration
Speed
Time
Acceleration
Speed
Time
Acceleration
Speed
Time
Acceleration
Speed
Time
Acceleration
When operated by
linear axes
When operated by
linear and rotary axes
When operated by
rotary axes
Speed
Time
G0
G0
G0
Speed
Time
G0
Speed
Time
N1
N2
Speed
Time
N1
N2
Speed
Time
N1
N2
0deg corner
(straight line)
45deg corner
90deg corner
Mechanical
system
Circularity
1.1
Circularity
0.7
Position
command
Standard
model
Feed-forward
generation
Position
control
Speed
control
Current
control
N1
N2
N1
N1
N2
N2 Tolerance
No overlap
With overlap
High
Medium
Low
Low
Low
Low
