CONFIDENTIAL
Mitsubishi Electric
Page 26/
102
.
3.3
SHORT-CUTS FROM IDLE WINDOW
3.3.1
QUICK ADN DIRECT ACCESS
A press on the
Names
softkey gives access to the quick ADN, allowing a quick way for dialling. See memory
section for details.
When the left softkey is reserved to access the pending network events menu and is labelled
Read
in this case, a
press on the
End
key allows to restore the
Names
label for the softkey. On return from the menus, the
previously removed
Read
softkey is restored automatically.
3.3.2
GENERAL MENU ACCESS
A press on the
Menu
softkey gives access to the general menu, allowing managing all phone functions.
3.3.3
DIRECT ALERT TONES ACCESS
A long press on the
key gives access to the alert mode menu, with a direct choice between (Vibrate and Ring).
See the setting section for details
3.3.4
KEYPAD LOCK
A press on the
Action
followed by a press on
#
key locks/unlocks the keypad. In the locked state:
•
The way for unlocking the keypad is indicated to the user on each key press, via an information screen,
•
No sounds are generated on key presses,
•
The backlight is "switched on" on key presses,
•
The left softkey is hidden and the right softkey label is
Unlock
.
•
The keypad locked icon is displayed between the softkeys.
•
The keypad unlock is obtained by a press on
Unlock
or
Actions
followed by a press on
#.
While in locked state:
•
Dialling emergency numbers is possible: international number 112, and all emergency numbers stored on
SIM. Receiving a new call unlocks the keypad automatically, allowing answering to the call. After call
termination, the locked state is retrieved automatically.
3.3.5
SPEED DIALLING
Long presses on
1
to
9
keys allow dialling the corresponding associated phone number. The
1
key is devoted to
voice mail.
3.3.6
LAST NUMBERS DIALLED LIST
A press on
SEND
while in Idle state displays the Last Numbers Dialled list with the most recent call displayed
first. A new press on
SEND
calls this number. See LND list management for details.
3.3.7
VOLUMES CONTROL
A press on the volume (
) key gives access to the volumes control menu. When entering the function, a volume
menu is displayed allowing to choose which volume to operate on, with the ring volume at first position.
The behaviour is the same as the access to the volume control via the menus. After tuning of one of the volumes,
the process returns directly to the volume menu.
