background image

1

E

IMPORTANT INFORMATION

WARNING: 

 TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT 

EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

RISK OF ELECTRIC 
SHOCK
DO NOT OPEN

CAUTION

CAUTION:  TO REDUCE THE RISK OF ELECTRIC 

SHOCK, DO NOT REMOVE COVER.
NO USER-SERVICEABLE PARTS 
INSIDE.
REFER SERVICING TO QUALIFIED 
SERVICE PERSONNEL.

The lightning 

fl

 ash with arrowhead symbol, within 

an equilateral triangle, is intended to alert the 
user to the presence of uninsulated “dangerous 
voltage” within the product’s enclosure that may 
be of suf

fi

 cient magnitude to constitute a risk of 

electric shock to persons.

The exclamation point within a triangle is 
intended to alert the user to the presence of 
important operating and maintenance (servicing) 
instructions in the literature accompanying the 
product.

CAUTION:

 The AC outlet shall be installed near the equipment and shall be easily accessible. 

FOR CUSTOMERS IN U.K.

IMPORTANT

The wires in this mains lead are coloured in accordance with the following code:

GREEN-AND-YELLOW : 

Earth

BLUE : 

Neutral

BROWN : 

Live

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the 
terminals in your plug proceed as follows:

• The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the 

letter 

E

 or by the safety earth   or coloured green or green-and-yellow.

• The wire which is coloured BLUE must be connected to the terminal which is marked with the letter 

N

 or coloured black.

• The wire which is coloured BROWN must be connected to the terminal which is marked with the letter 

L

 or coloured red.

Ensure that your equipment is connected correctly. If you are in any doubt consult a quali

fi

 ed electrician.

“WARNING: THIS APPARATUS MUST BE EARTHED.”

Содержание LDT651P









































Отзывы: