Mitsubishi Electric JT-MC206GS-W-E Скачать руководство пользователя страница 11

11

Initial setting checks

How to open/close the front cover  

1

 Pull the tab for opening the 

front cover.

Main unit

Tab

Front cover

Front cover

2

 Hold the handle are on the 

right hand side of the main 
unit.

3

 Open.

Main 

unit

Handle

Open

Close the front cover with the procedures for 
opening it in reverse.

Close the front cover so that there is 
no gap between the front cover and the 
main unit and push the tab in to latch 
the front cover shut.

Tab

Main unit

Front cover

Check to see that the front cover is fitted securely.

Press the front cover on the upper and lower parts 
against the main unit so that it is securely closed.

Gap

 Close the right side

 Close the left side 

 

(both the upper and lower parts)

Precautions for when opening/closing the front cover

If the front cover comes off, please reattach it with the 
following procedures.

It is designed to come off in order to prevent damage if it 

is opened too far.

1

 Press the bottom connecting part of the 

removed front cover into the bottom panel 
hook of the unit.

2

 Press the top connecting part of the front 

cover into the top panel hook of the unit.

3

 Check that the front cover is fi tted securely.

Click

Gap

Connecting 
part of the 
front cover

Panel hook 
of the unit

Make sure that there is no gap 
between the front cover and the unit 
when the front cover is closed.

Caution

Pull

Push

How to close the front cover

How to open the front cover

Содержание JT-MC206GS-W-E
















Отзывы: