─
5
─
4. Specifications
Model
Rated
voltage
(V)
Rated
frequency
(Hz)
Heater
Air
speed
Rated
current
(A)
Power con-
sumption
(W)
Air
speed
(m/s)
Noise
(dB)
Weight
(kg)
Drain tank
capacity
(
ℓ
)
JT-MC206GS-W-E
220-240
Single
phase
50-60
ON
HIGH 3.4-3.5
735-825
140-150 62-64
5
0.6
LOW 2.1-2.3
390-455
90-100 52-54
OFF
HIGH 2.2-2.4
475-560
140-150 62-64
LOW 1.5-1.7
175-220
90-100 52-54
• Air speed is calculated from the static pressure measured by the pitot tube (at the nozzle).
• Noise is the A range value measured in an anechoic room. (Average of the three points: 2 m from the front and
both sides of the unit.)
(2) How to open/close the front cover
Gap
Connecting
part of the
front cover
Hook of
the main
unit
Notes for opening/closing the front cover
If the front cover comes off, reattach it by the following
procedures.
1.
2.
3.
1. Pull the tab to open the front cover.
2. Hold the handle on the right hand
side of the main unit.
3. Open the front cover.
Close the front cover in the reverse order of opening
procedure.
Close the front cover so that there is no gap between
the front cover and the main unit, and push the tab in
to latch the front cover.
&KHFNWRVHHWKDWWKHIURQWFRYHULVILWWHG
securely.
Press the upper and lower parts of the front
cover against the main unit to close the cover
securely.
NOTE
Gap
1 Close the right side.
2 Close the left side (both
the upper and lower parts).
Tab
Main unit
Front cover
Main unit
Front cover
Handle
Open
Tab
Main unit
Front cover
How to close the front cover
Pull
Push
Click
How to open the front cover
*If the front cover is opened too wide, it will come off to
prevent damage to the main unit.
Fit the lower connecting part of the removed front
cover into the lower hook of the main unit.
Fit the upper connecting part of the front cover into
the upper hook of the main unit.
Check that the front cover is attached securely.
When closing the front cover, make sure that there
is no gap between the front cover and the main unit.
