background image

2

Do not install in locations where salt damage may 

occur, or where corrosive, neutral, or reductive 
gases are present.

This may cause malfunctions. 

Do not scratch, damage, process, excessively 

bend, pull, twist or bundle the power cable, and 
do not place heavy objects onto it or trap it. 

Doing so may damage the power cable, causing fires or 
electric shocks.

Do not install when the product (power cable) is 

electrified.

 

Doing so may result in electric shocks.

Do not attempt any disassembly or modification 

of the appliance that is not expressly stated in this 
manual.

Doing so may result in fires, electric shocks or injuries.

Do not use in a hot location such as a shower 

room, where condensation may form on the 
appliance, or where water may splash directly 
onto the appliance. 

This may cause electric shocks or malfunctions.

Electrical wiring work should be done by a certified 

professional in conformance with the technical 
standards for the equipment or official standards. 

Incorrect wiring can cause electric shocks and fires. 

Use single-phase 220-240V power.

Using the incorrect power supply may cause fires, electric 
shocks or malfunctions.

Use exclusive wiring

Using this appliance with other devices on a branch 
socket may cause abnormal heat, which may cause fires. 

Be sure to install a ground-fault circuit interrupter. 

Not doing so may result in electric shocks. 

A means for disconnection must be incorporated 
in the fixed wiring in accordance with the wiring 
rules. 

Install securely in a location strong enough to 

support the weight of the appliance.

 

Injuries may be caused if the appliance falls off the wall.

Wear gloves when installing the appliance.

Not doing so may result in injuries.

Follow 

instructions 

Follow 

instructions 

Safety Precautions 

Warning 

The following may lead to death or serious personal 
injury if the appliance is handled incorrectly.

Cautions 

The following may lead to injury or damage to 
property if the appliance is handled incorrectly.

Prohibited 

Prohibited 

Do not 

disassemble 

Do not use in the 

bathroom/

shower room

Содержание Jet Towel JT-SB216JSH-H-E














Отзывы: