Mitsubishi Electric HL2750U Скачать руководство пользователя | Manualshive

Страница: 14 / 47

background image

EN-14

1. Plug the attached power cord into the power cord inlet of

this projector.

2. Plug the other end of the power cord into a power outlet.

• The power cords for use in the U.S. and Europe are included with this projector. Use the appropriate one for your

country.

• This projector uses the power plug of 3-pin grounding type. Do not take away the grounding pin from the power

plug. If the power plug doesn’t ﬁ t your wall outlet, ask an electrician to change the wall outlet.

• The provided power cord for the U.S. is rated at 120 V. Never connect this cord to any outlet or power supply

using other voltages or frequencies than rated. If you use a power supply using other voltage than rated, prepare
an appropriate power cord separately.

• Use 100-240 V AC 50/60 Hz to prevent ﬁ re or electric shock.
• Do not place any objects on the power cord or do not place the projector near heat sources to prevent damage to

the power cord. If the power cord should be damaged, contact your dealer for replacement because it may cause
ﬁ re or electric shock.

• Do not modify or alter the power cord. If the power cord is modiﬁ ed or altered, it may cause ﬁ re or electric shock.

Caution:

• Plug in the power cord ﬁ rmly. When unplugging, hold and pull the power plug, not the power cord.
• Do not plug in or out the power cord with your hand wet. It may cause electric shock.

2

1

Earthing
terminal

Power cord (example)

Viewing computer images (continued)

About DDC

The COMPUTER/COMPONENT VIDEO IN-1 terminal of this projector complies with the DDC1/2B standard and the
COMPUTER/COMPONENT VIDEO DVI-D (HDCP) terminal complies with the DDC2B standard. When a computer
supporting this standard is connected to this terminal, the computer will automatically load the information from this
projector and prepare for output of appropriate images.

• After connecting a computer supporting this standard to this terminal, plug the power cord of the projector in the

wall outlet ﬁ rst, and then boot up the computer.

B. Plugging the power cord

• In order to ensure the safety in case of trouble with the projector, use an electrical outlet having an earth leakage

breaker to supply the power to the projector. If you do not have such outlet, ask your dealer to install it.

«
...
12
13
14
15
16
...
»

Содержание HL2750U
















































Отзывы:

Нет отзывов

Похожие инструкции для HL2750U

Бренд: JBL Страницы: 20

Бренд: D-ILA Страницы: 57

Бренд: Digital Projection Страницы: 110

Insta-DE Screen

Бренд: Elite Screens Страницы: 8

ImagePro 7100HC

Бренд: Dukane Страницы: 2

Бренд: Renkforce Страницы: 88

Бренд: IGNIA LIGHT Страницы: 16

Бренд: Eiki Страницы: 2

Бренд: Tripp Lite Страницы: 3

The Premiere LSP7TFAXXE

Бренд: Samsung Страницы: 56

Бренд: Faroudja Страницы: 40

Бренд: Canon Страницы: 9

Бренд: Canon Страницы: 8

Бренд: Canon Страницы: 2

Бренд: Canon Страницы: 4

Бренд: Canon Страницы: 36

SX50 - REALiS SXGA+ LCOS Projector

Бренд: Canon Страницы: 93

PixiePlus ELPSP10

Бренд: SP Controls Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды