EN-9
Operational range of the remote control
Reception distance
Operate the remote control within a distance of 10 m (30 feet) from the projector, pointing the IR beam at the remote
control photo-sensor (front, rear, or top) of the projector.
Vertical and front-to-back directions (ceiling mount)
Reception angle
Horizontal direction
When operating the remote control, keep the distance
from the remote control to the projector via the
screen within about 5 m (15 feet). The operable range
of the remote control, however, depends on the
characteristics of the screen.
Important:
• Keep the remote control photo-sensor out of direct sunlight or fluorescent lamp light.
• Keep the remote control photo-sensor at least 2 m (6 feet) away from fluorescent lamps. Otherwise, the remote
control may malfunction.
• If there is an inverter-operated fluorescent lamp near the remote control, the remote control operation may
become unstable.
• When you use the remote control too close to the remote control sensor, the remote control may not work
correctly.
• A remote control may operate improperly while you watch the 3D images. However, it is not a malfunction.
• When a remote control operates improperly while you watch the 3D images, change the setting of REMOTE
POSITION in the FEATURE menu. (See page 33.)
Using the remote control
20°
10°
20°
10°
30°
30°
20°
20°
30°
30°
Vertical and front-to-back directions
30°
30°
30°
30°
30°
30°
Front of
projector
Rear of
projector
Top of
projector
