This manual confers no industrial property rights or any rights of any other
kind, nor does it confer any patent licenses. Mitsubishi Electric Corporation
cannot be held responsible for any problems involving industrial property rights
which may occur as a result of using the contents noted in this manual.
Warranty
Exclusion of loss in opportunity and secondary loss from warranty liability
Regardless of the gratis warranty term, Mitsubishi shall not be liable for
compensation to:
(1) Damages caused by any cause found not to be the responsibility of
Mitsubishi.
(2) Loss in opportunity, lost profits incurred to the user by Failures of Mitsubishi
products.
(3) Special damages and secondary damages whether foreseeable or not,
compensation for accidents, and compensation for damages to products
other than Mitsubishi products.
(4) Replacement by the user, maintenance of on-site equipment, start-up test run
and other tasks.
For safe use
This product has been manufactured as a general-purpose part for general
industries, and has not been designed or manufactured to be incorporated in
a device or system used in purposes related to human life.
Before using the product for special purposes such as nuclear power, electric
power, aerospace, medicine or passenger movement vehicles, consult with
Mitsubishi Electric.
This product has been manufactured under strict quality control. However
when installing the product where major accidents or losses could occur if the
product fails, install appropriate backup or failsafe functions in the system.
HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
3. Specifications
3.1 General Specifications
*1 Do not use or store the GOT under pressure higher than the atmospheric pressure of altitude 0m (0ft.). Failure to observe this instruction may cause a malfunction.
When the air inside the control panel is purged by pressurization, the surface sheet may be lifted by high pressure. As a result, the touch panel may be difficult to press,
and the sheet may be peeled off.
*2 This indicates the section of the power supply to which the equipment is assumed to be connected between the public electrical power distribution network and the
machinery within the premises. Category
applies to equipment for which electrical power is supplied from fixed facilities. The surge voltage withstand level for up to the
raged voltage of 300 V is 2500 V.
*3 This index indicates the degree to which conductive material is generated in the environment where the equipment is used.
In pollution degree 2, only non-conductive pollution occurs but temporary conductivity may be produced due to condensation.
3.2 Performance Specifications
Item
Specifications
Operating ambient temperature
0 to 40
C
Storage ambient temperature
-20 to 60
C
Operating ambient humidity
10 to 90% RH, non-condensing (The wet bulb temperature is 39
C or less.)
Storage ambient humidity
10 to 90% RH, non-condensing (The wet bulb temperature is 39
C or less.)
Vibration resistance
Conforms to JIS
B3502 and
IEC61131-2
Frequency
Acceleration
Half-amplitude
Sweep Count
Under intermittent
vibration
5 to 9Hz
--
3.5mm
10 times each in X,
Y and Z directions
9 to 150Hz
9.8m/s
2
--
Under continuous
vibration
5 to 9Hz
--
1.75mm
9 to 150Hz
4.9m/s
2
--
Shock resistance
Conforms to JIS B3502, IEC 61131-2 (147 m/s
2
, 3 times each in X, Y and Z directions)
Operating atmosphere
Must be free of lamp black, corrosive gas, flammable gas, or excessive amount of electroconductive dust particles and
must be no direct sunlight. (Same as for saving)
Operating altitude
*1
2000 m (6562 ft) max.
Overvoltage category
*2
or less
Pollution degree
*3
2 or less
Cooling method
Self-cooling
Item
Specifications
GT1665HS-VTBD
Display
section
*1
Type
TFT color liquid crystal display (High intensity and wide angle view)
Screen size
6.5"
Resolution
640
480 dots
Display size
W132.5 (5.22)
H99.4 (3.91) [mm] (inch)
Display character
16-dot standard font: 80 characters
30 lines, 12-dot standard font: 106 characters
40 lines
Display color
65536 colors
Display angle
*2
Left/Right: 80 degrees, Top: 60 degrees, Bottom: 80 degrees (Horizontal format)
Intensity of LCD only
550[cd/m
2
]
Intensity adjustment
8-level adjustment
Life
Approx. 41,000h. (Operating ambient temperature: 25
C)
Backlight
LED type
Backlight off/screen saving time can be set.
*3
To u c h
panel
*4
Type
Analog resistive film
Key size
Minimum 2
2 dots (per key)
N u m b e r o f p o i n t s t o u c h e d
simultaneously
Simultaneous presses not allowed. (Only 1 point can be touched.)
Life
1 million times or more (operating force 0.98N max.)
Memory
*5
C drive
Flash memory (Internal), for storing project data (15Mbytes) and OS
Life (Number of write times): 100,000 times
Buzzer output
Single tone (tone length adjustable)
Switch
Operation switch
6 switches (6 contacts/common), N/O contact, Maximum rating 10mA/24VDC, Life: 1,000,000 times
Grip switch
1 switch (single wiring) (IDEC HE3B-M2PB), Enable switch (deadman switch) 3-position system of OFF
ON
OFF
2 N/O contacts, Maximum rating 1A/24VDC (resistance load), Maximum rating 0.3A/24VDC (induction load), Life: 100,000
times
Emergency stop switch
1 switch (single wiring) (IDEC XA1E-BV303R)
2 N/C contacts, Maximum rating 1A/24VDC (resistance load), Maximum rating 0.3A/24VDC (induction load), Life: 100,000
times
Keylock switch
(2-position switch)
1 switch (single wiring) (IDEC AS6M-2KT1PB)
2-notch type (Manual stop at each position/A key can be inserted and removed on only the left side./On the right side, a key
cannot be removed./Two keys are provided.)
2-position, Maximum rating 1A/24VDC (resistance load), Maximum rating 0.3A/24VDC (induction load), Life: 100,000 times
Environmental protective structure
*6
IP65F (valid when the external cable is connected, except for the connector conversion box side)
*1 Bright dots (always lit) and dark dots (unlit) may appear on a liquid crystal display panel. It is impossible to completely avoid this symptom, as the liquid crystal display
comprises of a great number of display elements. Flickers may be observed depending on the display color.
Please note that these dots appear due to its characteristic and are not caused by product defect.
Flickers and partial discoloration may be generated on the liquid crystal display panel due to the display contents or the contrast adjustment. However, please note that
these phenomena appear due to its characteristic and are not caused by product defect.
There is a difference in the display brightness and the color tones between liquid crystal display panels. When using multiple liquid crystal display panels, please note
that there is an individual difference between them.
A crosstalk (shadow as an extension of the display) may appear on the liquid crystal display panel. Please note that it appears due to its characteristic.
When the display section is seen from the outside of the display angle, the display color seems like it has changed. Please note that it is due to its characteristic.
Please note that the response time, brightness and color of the liquid crystal display panel may vary depending on the usage environmental temperature.
When the same screen is displayed for a long time, an incidental color or partial discoloration is generated on the screen due to heat damage, and it may not disappear.
To prevent heat damage, the screen saver function is effective.
For details on the screen saver function, refer to the following.
GT16 Handy GOT User's Manual
*2 Gradation inversion is a characteristic of liquid crystal displays. Please be forewarned that depending on the displayed color, the visualization may be difficult even within
the described view angle.
*3 The GOT screen saving/backlight off function prevents images from becoming permanently etched on the display screen.
GT16 Handy GOT User's Manual
*4 The touch panel is analog resistive film-type. If you touch the panel simultaneously in 2 points or more, the switch that is located around the center of the touched point,
if any, may operate. Do not touch the panel in 2 points or more simultaneously.
*5 ROM in which new data can be written without deleting the written data.
*6 Note that this does not guarantee all user’s operation environment. The protection is not applied when the interface environment protection cover or environment
protection back cover is removed. In addition, the product may not be used in environments under exposition of oil or chemicals for a long period of time, or in
environments filled with oil-mist.
*7 If the operating ambient temperature is other than 25
C, the error may become large.
External dimensions
W201 (7.91)
H230 (9.06)
D97 (3.82) [mm] (inch)
Weight
Approx.1.2kg (GT16
Handy GOT main unit only)
Compatible software package
GT Designer3 Version1.14Q or later
LED
POWER LED
1 LED
Lit in green: Power is correctly supplied.
Lit in orange: Screen saving and backlight not lit.
Blinks in orange/green: Blown back light bulb.
Not lit: Power is not supplied.
LED for operation switch display 6 LEDs, green (lighting control from the display section)
LED for grip switch display
1 LED, green (lighting control from display unit part)
Built-in clock precision
3.47 to 8.38 sec/day (Operating ambient temperature of 25
C)
*7
Battery
Type
Magnesium maganese dioxide lithium primary battery
Backup target
Clock data and maintenance time notification data, system log data
Life
Approx. 5 years (Operating ambient temperature of 25
C)
Built-in
interface
RS-422/485
RS-232
RS-422/485, RS-232 1ch each
Transmission speed : 115,200/57,600/38,400/19,200/9,600/4,800bps
Connector shape
: Square 42 pins (male)
Application
: PLC communication (Select either RS-422/485 or RS-232 when used)
Ethernet
Data transfer method: 100BASE-TX, 10BASE-T 1ch
Connector shape
: Square 42 pins (male)
Application
: For PLC communication, Gateway functions, PC communication (Project data upload/download,
OS installation)
USB
USB (Full Speed 12Mbps) Host 1ch
Connector shape
: TYPE-A
Application
: Data transfer, data storage
USB (Full Speed 12Mbps) Device 1ch
Connector shape
: Mini-B
Application
: PC communication (Project data upload/download, OS installation, FA transparent function)
CF card
Compact flash slot 1ch
Connector shape
: Dedicated for TYPE I
Application
: Data transfer, data storage, GOT startup
Item
Specifications
GT1665HS-VTBD
3.3 Power Supply Specifications
*1 The GOT continues to operate even upon 5ms or shorter instantaneous power failure.
The GOT stops operating if there is extended power failure or voltage drop, while it automatically resumes operation as soon as the power is restored.
3.4 External Dimensions
4. Maintenance and Inspection
The GOT does not include consumable components that will cause the shorten life.
However, note that battery life is 5 years and LCD life is 50,000 hours.
It is recommended to replace the battery periodically. (For the replacement of the
liquid crystal screen, please consult your nearest sales office or FA Center.)
4.1 Daily Inspection
Daily inspection items
Refer to the following for the model names of the protection sheet or the
replacement procedure.
GT16 Handy GOT User’s Manual
4.2 Periodic Inspection
Yearly or half-yearly inspection items
The following inspection should also be performed when equipment has been
moved or modified or the wiring changed.
Item
Specifications
GT1665HS-VTBD
Input power supply voltage
24V DC (+10% -15%)
Power consumption
11.6W (480mA/24V DC) or less
At backlight off
8.2W (340mA/24V DC) or less
Inrush current
30A or less (maximum load) 2ms
Permissible instantaneous power failure time
*1
Within 5ms
Noise immunity
Noise voltage: 1000Vp-p, Noise width: 1
s (by noise simulator of 30 to 100Hz noise frequency)
Dielectric withstand voltage
500V DC for 1 minute (across power supply terminals and earth)
Insulation resistance
10M
or larger by insulation resistance tester (across power supply terminals and earth)
Unit: mm (inch)
201 (7.92")
21 (0.83") 50 (1.97") 47 (1.86")
230 (9.06")
No.
Inspection Item
Inspection
Method
Criterion
Action
1
C
onnection s
tatus
Loose connectors
Visual check
Not loose
R e p l a c e
external cable.
2
Usag
e st
atus
Dirt on protection
sheet
Visual check
Not
outstanding
Replace with
new one
Foreign material
attachment
Visual check
No foreign
matter sticking
Remove clean
No.
Inspection Item
Inspection
Method
Criterion
Action
1
Surrounding
environment
Ambient
temperature
Make
measurement
with
thermometer
or hygrometer
Measure
corrosive gas
0 to 40
C
For use in control
panel,
temperature
inside control
panel is ambient
temperature
Ambient
humidity
10 to 90%RH
Atmosphere
No corrosive
gas
2
Power supply voltage
check
24V DC
Measure
voltage across
terminals.
20.4 to 26.4V
DC
Change supply
power
3
Mounting
status
Dirt, foreign
matter
Visual check
No dirt, foreign
matter sticking Remove, clean
4
Connection
status
L o o s e
connectors
Visual check
Not loose
Replace external
cable.
5
Battery
Check the
system alarm
(error code:
500) report on
the Alarm
Information
screen
( P r e v e n t i v e
maintenance)
Replace with new
battery when the
current battery
has reached the
specified life
span, even if
battery voltage is
not displayed.
4.3 Battery Replacement
The battery backs up clock data, alarm history and recipe data.
Screen data is stored in the flash memory and data is retained even if the battery is
dead.
Battery model name
Handy GOT is shipped with the following battery.
Use it at replacement.
Battery replacement procedure
1) After keeping the GOT turned ON more than 10 minutes, turn OFF the GOT. After
turning OFF the GOT, perform the procedure 2) to 7) within 5 minutes.
2) Loosen the environmental protection back cover screws at two points on GOT
rear face to remove the cover.
3) Remove the old battery from the holder and disconnect the connecter.
4) Insert the connector of the new battery.
5) Install the battery to the GOT.
6) Attach the environmental protection back cover and tighten the screws.
Tightening torque: 0.36 to 0.48 N•m
7) Turn the GOT power on.
8) Check if the battery condition is normal with the utility.
Refer to the following for the details of battery status display.
GT16 Handy GOT User’s Manual
Battery life
Approximate battery life:
5 years (ambient temperature: 25
C)
Battery replacement: In 4 to 5 years
Approximate life is 5 years, but life may be shorter depending on the ambient
temperature, therefore, note that the battery must be replaced in 4 to 5 years. Make
sure to purchase a new battery as needed as it self-discharges.
Battery status can be confirmed on a GOT utility screen.
For details of battery status or how to output alarm, refer to the following:
GT16 Handy GOT User’s Manual
Product name
Model name
Battery
GT15-BAT
Environmental
protection
back cover
screw
Connector for
battery connection
Battery
Insert the red lead as
to pass it through the
notch on the circuit board.
Circuit
board
Insertion
direction
Lead (Black)
Lead (Red)
Battery
Environmental
protection
back cover
screw
5. Precautions
5.1 Cautions on Using Emergency Stop Switch
1) When using the emergency stop switch in the handy GOT, judge the validity to
use the emergency stop switch in accordance with the risk assessment in your
system.
2) When using the parallel circuit (which disables the emergency stop status while
the handy GOT is removed), the system may not conform to the safety
standards. Check the safety standards required in the system, and then judge
the validity to use the emergency stop switch.
「电器电子产品有害物质限制使用标识要求」的表示方式
Note: This symbol mark is for China only.
含有有害6物质的名称，含有量，含有部品
本产品中所含有的有害 6 物质的名称，含有量，含有部品如下表
所示。
产品中有害物质的名称及含量
本表格依据SJ/T 11364的规定编制。
○:表示该有害物质在该部件所有均质材料中的含量均在GB/T
26572规定的限量要求以下。
×:表示该有害物质至少在该部件的某一均质材料中的含量超出GB/
T 26572规定的限量要求。
部件名称
有害物质
铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴
二苯醚
(PBDE)
显示器
GOT
外壳
○
○
○
○
○
○
印刷基板
×
○
○
○
○
○
背光灯
(CCFL)
○
×
○
○
○
○
电缆
×
○
○
○
○
○