Mitsubishi Electric GT14, Руководство пользователя

Страница: 483 / 1546

17
INST
ALLA
TION O
F
CO
REOS
, BO
OT
O
S AND
ST
AND
ARD M
O
NIT
O
R OS
18
DRA
WING
SO
FTW
A
RE
SE
TTI
N
GS
19
MAINTENANCE AND INS
P
E
CT
IO
N
20
T
ROUBL
ESHOOTI
NG
21
DIRECT CONNECTION
T
O
CP
U
22
CO
M
P
U
T
E
R
L
INK
C
O
NNECTION
23
ETHERNET CONNECTION
24
CC-Link CONNECTION (V
ia G
4)
23. ETHERNET CONNECTION
23.4 PLC Side Setting
23 - 33
23.4.8 Connecting to C controller
module (Q Series)
This section describes the settings of the GOT and C
controller module (Q Series) in the following case of the
system configuration.
POINT POINT POINT
C Controller module (Q Series)
For details of C controller module (Q Series), refer to
the following manual.
C Controller Module User's Manual (Hardware,
Design, Function Explanation)

System configuration
*1 These setting items do not exist on the PLC side. However,
the virtual values must be set on the GOT side.
 [Controller Setting] and [Ethernet] of GT
Designer3

Utility setting for C controller module (Q
Series)
(1) Q12DCCPU-V
Use SW3PVC-CCPU-J Ver.3.04E or later for the C
Controller module (Q Series) setting utility.
(a) Connection settings
: Necessary : As necessary : Not necessary
*1 If the IP address of the C controller module (Q Series) has
been changed, input the changed IP address or host name.
*2 If the account of the C controller module (Q Series) has been
changed, input the changed user name and password.
(b) Online operation
: Necessary : As necessary : Not necessary
<GOT>
(The settings other than the
following are set to the default)
Network No. : 1
PLC No. : 1
IP address : 192.168.3.18
Port No. : 5001
Communication
format : UDP(fixed)
Network No. : 1 (virtual)
PLC No. : 2 (virtual)
IP address : 192.168.3.1
Port No. : 5006(fixed)
Communication
format : UDP(fixed)
<C controller module (Q Series)>
(The settings other than the
following are set to the default)
1
Network No. : 1 (virtual)
PLC No. : 3 (virtual)
IP address : 192.168.3.2
Port No. : 5006(fixed)
Communication
format
: UDP(fixed)
<C controller module (Q Series)>
(The settings other than the following are
set to the default)
2
*1
*1
*1
*1

 Utility setting for C controller module (Q Series)
[Controller Setting] and [Ethernet] of GT Designer3
Item Set value
Setting necessity at
GOT connection
Target module
*1
192.168.3.3
Write authority Mark the checkbox
User name target
Password password
Detailed settings -
Item Set value
Setting necessity at
GOT connection
Detailed settings Refer to (3).