Mitsubishi Electric GOT2000 Series, Руководство по подключению

Страница: 746 / 1224

13 - 20
13.5 PLC Side Settings
13.5.2 Connecting AJ65BT-R2N
This section describes the settings of the GOT and peripheral connection module in the following case of the system
configuration.
POINT POINT POINT
(1) Peripheral connection module
For details of the peripheral connection module, refer to the following manual.
➠ Peripheral Connection Module Type AJ65BT-R2N User's Manual
(2) CC-Link module
For details of the CC-Link module, refer to the following manual.
➠
CC-Link System Master/Local Module User's Manual QJ61BT11N
(3) CC-Link built-in CPU
For details on the CC-Link function built-in CPU, refer to the following manual.
➠ MELSEC-L CC-Link System Master/Local Module User's Manual
■1.
System configuration
*1 The Start I/O No. of the CC-Link module is set to "0"
■2.
Switch setting of peripheral connection module
Set the station number setting switch, data link transmission speed setting switch, and operation setting DIP switch.
(1) Station number setting switch
: Necessary : As necessary : Not necessary
Station number setting switch Description Set value
Setting necessity at GOT
connection
AJ65BT-R2N station number
setting
1 to 64
<CC-Link module> *1
Station type
Station No.
Mode
All connect count
Transmission speed : Master station
: Station No. 0
: Remote net (Ver.1 mode)
: 1
: 156kbps
<AJ65BT-R2N>
Station type
Station No.
Number of stations occupied
Transmission speed
: Intelligent device station
: Station No. 1
: Exclusive station 1
: 156kbps
<GOT>
Transmission speed: 9600bps
Setting example
Setting example
Setting example
(1)
2
4
(3) (2)
(4)