Mitsubishi Electric FR-F800, Инструкция по эксплуатации, Страница: 244 / 834

(E) Environment setting parameters Parameters
5 - 82
Rated frequency (Pr. 999 = "20 (50 Hz), 21 (60 Hz)")
5.4.16 Extended parameter display and user group function
This function restricts the parameters that are read by the operation panel and the parameter unit.
The read value is always "9999".
Pr. Name
Initial value
Pr. 999 = "21" Pr. 999 = "20"
Refer to
page
FM type CA type
3 Base frequency 60 Hz 50 Hz 60 Hz 50 Hz 5-517
4 Multi-speed setting (high speed) 60 Hz 50 Hz 60 Hz 50 Hz 5-57
20
Acceleration/deceleration
reference frequency
60 Hz 50 Hz 60 Hz 50 Hz 5-99
37 Speed display 0 0 5-191
55 Frequency monitoring reference 60 Hz 50 Hz 60 Hz 50 Hz 5-206
66
Stall prevention operation
reduction starting frequency
60 Hz 50 Hz 60 Hz 50 Hz 5-175
125 (903)
Terminal 2 frequency setting gain
frequency
60 Hz 50 Hz 60 Hz 50 Hz
5-260
126 (905)
Terminal 4 frequency setting gain
frequency
60 Hz 50 Hz 60 Hz 50 Hz
263 Subtraction starting frequency 60 Hz 50 Hz 60 Hz 50 Hz
5-426
266
Power failure deceleration time
switchover frequency
60 Hz 50 Hz 60 Hz 50 Hz
386
Frequency for maximum input
pulse
60 Hz 50 Hz 60 Hz 50 Hz 5-135
390 % setting reference frequency 60 Hz 50 Hz 60 Hz 50 Hz 5-495
505 Speed setting reference 60 Hz 50 Hz 60 Hz 50 Hz 5-191
584
Auxiliary motor 1 starting
frequency
60 Hz 50 Hz 60 Hz 50 Hz
5-386 585
Auxiliary motor 2 starting
frequency
60 Hz 50 Hz 60 Hz 50 Hz
586
Auxiliary motor 3 starting
frequency
60 Hz 50 Hz 60 Hz 50 Hz
C14 (918) Terminal 1 gain frequency (speed) 60 Hz 50 Hz 60 Hz 50 Hz 5-260
1013
Running speed after emergency
drive retry reset
60 Hz 50 Hz 60 Hz 50 Hz 5-162
Tab. 5-38: Influence of Pr. 999 on the rated frequencies
Pr. Name
Initial value Setting range Description
FM CA
160
E440
User group read selection 9999 0
9999
Only simple mode parameters can be
displayed.
0
Simple mode and extended
parameters can be displayed.
1
Only parameters registered in user
groups can be displayed.
172
E441
User group registered display/
batch clear
0
(0 to 16)
Displays the number of groups that
are registered as user groups.
(Read-only)
9999 Batch clear of user group registrations
173
E442
User group registration
9999
0 to 1999, 9999
Sets the parameter number to register
for the user group.
174
E443
User group clear
9999
0 to 1999, 9999
Sets the parameter number to clear
from the user group.