Mitsubishi Electric FR-E800, Инструкция по эксплуатации

Страница: 329 / 484

328
13. (T) Multi-Function Input Terminal Parameters
13.6 Input terminal function selection
13.6
Input terminal function selection
Use the following parameters to select or change the input terminal functions.
*1 The initial value is for standard models.
*2 The initial value is for the Ethernet model and the safety communication model.
*3 The setting range differs depending on the model. For more information, refer to the parameters available for each signal.
 Input terminal function assignment
• Signals can be input to the inverter by using physical terminals (except for the FR-E800-SCE) or via communication.
• Use the following parameters to assign functions to input terminals. Check the terminal available for each parameter.
○ : Assignment/input available, ─ : Assignment/input unavailable (no function)
Pr. Name
Initial
value
Initial signal Setting range
178
T700 STF/DI0 terminal
function selection
60 STF (Forward rotation command)
0 to 5, 7, 8, 10, 12 to 16, 18, 23 to 27, 30, 37, 42,
43, 46, 47, 50, 51, 60, 62, 65 to 67, 72, 74, 92,
9999
179
T701 STR/DI1 terminal
function selection
61 STR (Reverse rotation command)
0 to 5, 7, 8, 10, 12 to 16, 18, 23 to 27, 30, 37, 42,
43, 46, 47, 50, 51, 61, 62, 65 to 67, 72, 74, 92,
9999
180
T702 RL terminal function
selection
0 RL (Low-speed operation command)
0 to 5, 7, 8, 10, 12 to 16, 18, 23 to 27, 30, 37, 42,
43, 46, 47, 50, 51, 62, 65 to 67, 72, 74, 92,
9999
*3
181
T703 RM terminal function
selection
1 RM (Middle-speed operation command)
182
T704 RH terminal function
selection
2 RH (High-speed operation command)
183
T709 MRS terminal
function selection
24 MRS (Output stop)
184
T711 RES terminal
function selection
62
*1
RES (Inverter reset)
9999
*2
No function
185
T751 NET X1 input
selection
9999 No function
0 to 4, 8, 13 to 15, 18, 23, 24, 26, 27, 30, 37, 42,
43, 46, 47, 50, 51, 72, 74, 92, 9999
186
T752 NET X2 input
selection
9999 No function
187
T753 NET X3 input
selection
9999 No function
188
T754 NET X4 input
selection
9999 No function
189
T755 NET X5 input
selection
9999 No function
Pr. Name
Initial
value
Setting range Description
699
T740
Input terminal filter 9999
5 to 50 ms Set the time delay for the input terminal response.
9999 No filter for the input terminal
Pr.
Terminal
name
External input terminal (physical terminal)
Input via
communication
*1
FR-E800 FR-E800-E FR-E800-SCE
178 STF/DI0 ○ (STF) ○ (DI0) —
Forward rotation
command only
179 STR/DI1 ○ (STR) ○ (DI1) —
Reverse rotation
command only
180 RL ○ — — ○
181 RM ○ — — ○
182 RH ○ — — ○
183 MRS ○ — — ○
184 RES ○ — — ○
185 NET X1 — — — ○
186 NET X2 — — — ○
187 NET X3 — — — ○
188 NET X4 — — — ○
189 NET X5 — — — ○