Mitsubishi Electric FR-CC2-P, Инструкция по эксплуатации

Страница: 112 / 184

(A) Application parameters
PARAMETER
111
5
GROUP
A
5.6
(A) Application parameters
5.6.1
Self power management

Connection diagram
• For sink logic and Pr.192 = "17" (terminal R1, S1 inputs)
• For sink logic and Pr.192 = "17" (24 V external power supply input)
Purpose Parameter to set
Refer to
page
To reduce the standby power Self power management P.A006, P.E300 Pr.30, Pr.248 111
To restart after instantaneous
power failure
Automatic restart
operation after
instantaneous power
failure
P.A702 Pr.57 113
To decelerate the motor to a stop
at instantaneous power failure
Power failure time
deceleration-to-stop
function
P.A730 Pr.261 114
By turning ON the magnetic contactor (MC) on the input side before the motor is started and turning OFF the MC after
the motor is stopped, power is not supplied to the main circuit, reducing the standby power.
Pr. Name Initial value Setting range Description
248
A006 Self power management
selection
0
0 Self power management function disabled
1
Self power management function enabled (main
circuit OFF at protective function activation)
2
Self power management function enabled (main
circuit OFF at protective function activation due
to a circuit failure or at protective function
activation of the slave)
30
E300
Reset selection during
power supply to main
circuit
0
0
When power is supplied only to the control
circuit, and then switched to be supplied to both
the control and main circuits, converter reset is
performed.
100
When power is supplied only to the control
circuit, and then switched to be supplied to both
the control and main circuits, converter reset is
not performed.
MC1
Converter unit Inverter
R/L1
S/L2
T/L3
R1/L11
S1/L21
U
V
W
M
(MC1)IPF
SE
24VDC
MC1
MCCB
R1/L11
S1/L21
P/+
N/-
P/+
N/-
RDA MRS(X10)
RSO RES
Y17 X94
SE SD
MC1
Converter unit Inverter
R/L1
S/L2
T/L3
R1/L11
S1/L21
U
V
W
M
(MC1)IPF
SE
24VDC
MC1
MCCB
P/+
N/-
P/+
N/-
RDA MRS(X10)
+24
SD
24VDC
+24
SD
24VDC
RSO RES
Y17 X94
SE SD