Mitsubishi Electric F930GOT-BWD, Руководство по эксплуатации

Страница: 182 / 342

Graphic Operation Terminal GOT-F900 Observe status function 17
17-2
17.2 Applicable version
GOT
Screen creation software
17.3 Observe status cycle
Set the cycle at which the GOT monitors whether the specified triggers are realized.
Select "always" or "constant cycle".
• Always:
Every time communication is performed between the GOT and the PLC, the GOT monitors
whether the specified triggers are realized. (every 200 to 300 ms.)
• Constant cycle: The cycle can be set from 1 to 60 seconds with an increment of 1 second.
At the set cycle, the GOT monitors whether the specified triggers are realized.
17.4 Setting the triggers
Set the triggers to be monitored.
Up to two bit devices can be set.
• Trigger 1: Set ON or OFF of a bit device.
• Trigger 2: Set ON or OFF of a bit device.
- When trigger 1 and trigger 2 are set, the GOT performs the operation described in the
next paragraph only when both triggers are realized.
- Make sure to set trigger 1. and set trigger 2 if necessary.
Product model name Version
F930GOT V2.00 or later
F940, F943GOT V3.10 or later
F940WGOT V1.00 or later
Software name Applicable version
GT Designer SW1D5C-GOTR-PACK(C) or later
FX-PCS-DU/WIN-E V2.50 or later
Example: Trigger 1: "ON" is set.
Trigger 2: "OFF" is set.
Both triggers are realized.
ON
OFF
ON
OFF