••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
12
step
11.
Attach the metal part.
• Adjust the upper side first, then push the lower
side into the unit.
• Take care not to deform the springs.
step
12.
Fix the metal part with four screws.
step
13.
Connect the cord to the circuit board on the metal
part.
step
14.
Attach the front covers.
• Attach the left side cover and push to the left.
• Then, attach the right side cover.
step
15.
Fix the front covers with two screws.
step
16.
Close the left end of each screw covers on both sides
of the cover.
• Follow the same procedures when attaching a HDD
to HDD 2, or removing or replacing the HDDs.
Connections