Mitsubishi Electric DV207SB, Руководство пользователя

Страница: 13 / 27

9 9
If you are using an Apple Macintosh, change the resolution by doing the
following:
MacOS 8.x/9.x
1. Click the Apple icon at the top, left corner of the screen, select
Control
Panel
and then select
Monitors
.
2. Select a resolution of 1600 x 1200 pixels with between 60Hz refresh rate.
3. If refresh rate of 60Hz is not available, click
Recommended
in the
Show
drop-down box and change it to
All
. Select the resolution and refresh rate
as above.
A colour depth of either
Thousands
or
Millions
is recommended.
MacOS X
1. Click the Apple icon at the top, left corner of the screen, select
System
Preferences
and then select
Displays
.
2. Select a resolution of 1600 x 1200 pixels with between 60Hz refresh rate.
3. A colour depth of either
Thousands
or
Millions
is recommended.
Supported Graphics Modes and Refresh Rate Selection
There is no need to choose the highest possible refresh rate when using an
LCD monitor. It is not technically possible for an LCD monitor to flicker. Even at
a refresh rate of 60 Hz you will get an absolutely flicker-free image.
For best results, it is important that you set the graphics adaptor to use one of
the monitor’s preset display modes shown in
Table 1
on the next page. Other
graphics signals may be displayed poorly or not at all. Note that the DV207SB’s
preset modes correspond to VESA or Apple Macintosh standard graphics
signals for these resolutions. All recent models of graphics adaptor should be
able to support these modes. For the native resolution of 1600 x 1200 pixels,
for example, refresh rates of 60 and 70 Hertz are supported.
With Windows 95, 98, ME, 2000 or XP you can change the refresh rate of the
graphics signal as follows: