EN-37
FEATURE menu
LANGUAGE
ADVANCED MENU
FEATURE
ASPECT
PROJECTOR ID
NORMAL
A
AUTO
English
GROUP ID
ALL
DISPLAY INPUT
ENTER
CINEMA MODE
PASSWORD FUNCTION
MENU POSITION
1
1
2
2
opt.
RESET ALL
OK
FEATURE
ADVANCED MENU
SETUP
SCART INPUT
AUTO
AUTO
OFF
STANDARD
OFF
2
2
VIDEO SIGNAL
LAMP WARNING
HIDE OSD
LAMP 1 TIME RESET
OK
LAMP 2 TIME RESET
OK
FILTER TIME RESET
OK
1
1
opt.
1.
ITEM
SETTING
FUNCTION
ASPECT
NORMAL
Select to change the aspect ratio automatically depending on the
input signal. (Select this option for normal use.)
16:9
Select to expand squeezed (or horizontally compressed) images
such as DVD images to 16:9. Press the ENTER button to make
further settings such as positioning of the displayed image and
selection of signals expanded by this function. (See page 30.)
FULL
Select to project images in full size (1024 x 768 pixels) irrespective
of type of input signal.
PROJECTOR ID
ALL
Select this option to control the projector regardless of the ID
number. (See page 60.)
01 to 63
Use to set the ID number (two-digit number). (See page 60.)
GROUP ID
A to Z
Use to set the ID number for controlling multiple projectors by
groups for monitoring and control via the SERIAL terminal. (See
page 60.)
PASSWORD FUNCTION
DISPLAY INPUT /
MENU ACCESS /
SPLASH ID SCREEN
Use to enable or cancel the password lock. See page 56 for details.
MENU POSITION
1 (upper left) / 2 (lower right) /
3 (center)
Use to change the position of the menu.
CINEMA MODE
AUTO
The fi lm mode will be automatically activated when a fi lm source
signal is input.
Select AUTO for normal use.
When fl icker occurs on the screen, frame dropping or other incorrect
display occurs, or jaggies on slanting lines are remarkable, select
either FILM or VIDEO, which improves the symptom better.
FILM
Fixed to the fi lm mode.
VIDEO
The fi lm mode will not be activated.
LANGUAGE
/ English / Español /
Deutsch / Français / Italiano /
/
/
/
PORTUGUÊS / SVENSKA /
POLSKI / Nederlands/
Norsk(Bokmål) / Türkçe /
ѓѥќѥѳъѕ
/ Bahasa Indonesia /
Bahasa Melayu /
Use to select the language used in the menus.
ADVANCED MENU
ENTER
The ADVANCED MENU is displayed for the following settings.
VIDEO SIGNAL
AUTO / NTSC / PAL / SECAM
/ 4.43NTSC / PAL-M / PAL-N /
PAL-60
When AUTO is selected, the appropriate video format is
automatically selected depending on the input signal. If the image
isn’t displayed correctly, select the desired video format manually.
SETUP
AUTO
Select to change the SETUP mode automatically.
OFF
Select to make black lighter.
3.75% / 7.5%
Select to make black thicker.
• When 7.5% is chosen, the brightness is decreased by the set-
up cancel function for the U.S. Choose OFF when the image is
dark.
SCART INPUT
ON / OFF
Choose ON when connecting the projector with a device equipped
with the SCART terminal that can output RGB signal. SCART
terminal is used mainly in Europe. Choose OFF normally. (Available
only for the input signal from the COMPUTER/COMPONENT VIDEO
IN-1 terminal.)
Menu operation (continued)
