EN-7
ENGLISH
Projector exterior view
1.
External control panel
(See
"Projector" on page 8
for details.)
2.
Lamp cover
3.
Vent (heated air exhaust)
4.
Quick-release button
5.
Focus ring and Zoom ring
6.
Front IR remote sensor
7.
Projection lens
8.
Vent (air intake)
Do not replace the lamp immediately after using the projector
because the lamp would be extremely hot and it may cause
burns.
9.
RGB signal output socket
10. RGB (PC)/Component Video (YPbPr/ YCbCr) signal
input socket x 2
11. HDMI input port
12. Serial control port
13. LAN (RJ-45) port
14. Audio input jack
Audio output jack
15. S-Video input socket
Video input socket
16. Kensington lock
17. AC power cord inlet
18. Quick-release foot
19. Security bar
20. Rear adjuster foot
Kensington Lock
This projector has a Kensington Security Standard connector
for use with Kensington MicroSaver Security System.
Refer to the information that came with the Kensington System
for instructions on how to use it to secure the projector. Please
contact Kensington Technology Group below.
Kensington Technology Group
2855 Campus Drive
San Mateo, CA 94403, U.S.A.
Phone: +1- (650)572-2700 Fax: +1- (650)572-9675
Front/upper side
7
6
1
3
4
5
2
8
Rear/lower side
14
19
15
10
18
16
17
20
13
11
12
9
