4
WT06411X06
Display Section
The main display can be displayed in two different modes: "Full" and "Basic."
The factory setting is "Full." To switch to the "Basic" mode, change the setting on the "Main display" setting screen (Main menu > Initial setting >
Main display).
▌
Full mode
▌
Basic mode
*
All icons are displayed for explanation.
①
⑪
②
㉑
③
⑲
⑳
④
⑤
⑥
⑧
⑩
⑦
⑨
⑫ ⑬ ⑭ ⑮ ⑯ ⑰ ⑱
Fri
Mode
Temp.
Fan
Room
Cool
Auto
Set temp.
①
②
③
④
⑤
Fri
Cool
Mode
Temp.
Fan
Auto
Set temp.
▌
①
Operation mode
Indoor unit operation mode appears here.
▌
②
Set temperature
Set temperature appears here.
▌
③
Clock
Current time appears here.
▌
④
Fan speed
Fan speed setting appears here.
▌
⑤
Button function guide
Functions of the corresponding buttons appear here.
▌
⑥
Appears when the ON/OFF operation is centrally controlled.
▌
⑦
Appears when the operation mode is centrally controlled.
▌
⑧
Appears when the set temperature is centrally controlled.
▌
⑨
Appears when the filter reset function is centrally controlled.
▌
⑩
Indicates when filter needs maintenance.
▌
⑪
Room temperature
Current room temperature appears here.
▌
⑫
Appears when the buttons are locked.
▌
⑬
Appears when the On/Off timer, Night setback, or Auto-off timer function is
enabled.
appears when the timer is disabled by the centralized control system.
▌
⑭
Appears when the Weekly timer is enabled.
▌
⑮
Appears while the units are operated in the energy-save mode. (Will not
appear on some models of indoor units)
▌
⑯
Appears while the outdoor units are operated in the silent mode.
▌
⑰
Appears when the built-in thermistor on the remote controller is activated to
monitor the room temperature (
⑪
).
appears when the thermistor on the indoor unit is activated to monitor the
room temperature.
▌
⑱
Indicates the vane setting.
▌
⑲
Indicates the louver setting.
▌
⑳
Indicates the ventilation setting.
▌
㉑
Appears when the set temperature range is restricted.
Most settings (except ON/OFF, mode, fan speed, temperature) can
be made from the Main menu.