(C)
(F),(G)
(D),(E)
Fig.1
Fig.2
Fig.1
19
Be careful removing heavy parts.
8-2 THERMISTOR (Liquid piping temperature detection)
8-3 THERMISTOR (Intake air temperature detection)
OPERATING PROCEDURE
PHOTOS
1.Removing the thermistor and thermistor holder
(1)Pull out the thermistor holder(F) and thermistor
(G) which are fixed the control box.
OPERATING PROCEDURE
PHOTOS
1.Removing the cover
(1)Remove the fixing screws(two) of the cover(C) and
remove the cover.
2.Removing the thermistor
(1)Remove the thermistor(D), from the thermistor
holder(E), which are installed on the copper tube.
