Mitsubishi Electric CITY MULTI MA PAR-41MAA Скачать руководство пользователя страница 17

Страница: 17 / 84

Press the F1 or F2 button to move the cursor to

the desired temperature setting (cooling or heating).
Press the F3 button to decrease the selected
temperature, and press the F4 button to increase.

•

Refer to the table below for the settable temperature

range for different operation modes.

•

The preset temperature settings for cooling and heating in

the Auto (dual set point) mode are also used by the Cool/

Dry and Heat modes.

•

The preset temperatures for cooling and heating in the

Auto (dual set point) mode must meet the conditions

below:

•

Preset cooling temperature is higher than preset heating temperature.

•

The minimum temperature difference requirement between cooling and

heating preset temperatures (varies with the models of indoor units

connected) is met.

•

If preset temperatures are set in a way that does not meet the minimum

temperature difference requirement, both preset temperatures will

automatically be changed within the allowable setting ranges.

Settable preset temperature range

Operation mode

Preset temperature range

Cool/Dry

19 ~ 30 ºC (67 ~ 87 ºF)

Heat

17 ~ 28 ºC (63 ~ 83 ºF)

Auto (Single set point)

19 ~ 28 ºC (67 ~ 83 ºF)

Auto (Dual set points)

[C ool] Preset temperature range for the Cool mode

[H eat] Preset temperature range for the Heat mode

Fan/Ventilation

Not settable

The settable temperature range varies with the model of indoor units.

Fan speed

Each pressing of the F4 button cycles through the following

fan speeds.

Auto

•

The available fan speeds depend on the models of connected

indoor units.

Preset

temperature

for heating

Preset

temperature

for cooling

Содержание CITY MULTI MA PAR-41MAA





















































































Результаты поиска

Содержание CITY MULTI MA PAR-41MAA

Отзывы:

Mitsubishi Electric CITY MULTI MA PAR-41MAA, Инструкция, Страница: 17 / 84

Результаты поиска

Содержание CITY MULTI MA PAR-41MAA

Отзывы: