8
1. Setup and Operation
For assistance call 1(800) 332-2119
Tun ing Channels from the Antenna Input
After performing a channel scan, use these methods to
tune to channels on the
ANT
input. Channels can be
either from an over-the-air antenna or from direct cable
service.
Enter the channel number using the number keys
•
on the remote control and press
ENTER
.
Include the sub-channel when tuning digital chan-
•
nels. For a two-part digital channel, such as 3-1,
press
3
—
CANCEL
1 ENTER
.
Press
•
CH
/
to change channels one channel
at a time.
Press and hold
•
CH
/
to speed through chan-
nels.
Press
•
LAST
to return to the previous channel.
Use the Fav (Favorites) feature to tune to up to nine
•
favorite channels. See page 10 .
Using an External Sound System
To switch from the internal TV speakers to an external
sound system:
Press
1.
MENU
.
Display the
2.
Sound > TV Speaker
option.
Press
3.
ENTER
to switch between
ON
and
OFF
..
Additional audio controls are in the
Sound
menu, page
21 .
Picture Settings
To get the best picture under dif-
1.
ferent viewing conditions, set the
Picture Mode first before changing
other video settings. See page 20 .
a.
Press
VIDEO
multiple times to select
one of these Picture Modes:
Name
When to Use
Brilliant
Under bright light
Bright
For most daytime viewing
Natural
For most nighttime viewing
Game
With gaming consoles
b.
Press
ENTER
to confirm your selection.
Wait a few seconds for
2.
the display to clear.
Additional picture options are available in the
Picture
menu, page 20 .
Naming
Assign helpful names to TV inputs.
Press
1.
MENU
.
Go to the
2.
Setup > Input > Input Name
menu.
In the inputs list, highlight the input to change and
3.
press
ENTER
.
Highlight a name in the name list.
4.
Press
5.
ENTER
to confirm
the name.
Press
6.
EXIT
to clear
menus.
Removing
To remove unused inputs from the input list,
Switch to an input other than the one you are
1.
removing.
Go to the name list for the input as described
2.
above.
Highlight
3.
Skip this input
and press
ENTER
.
Press
4.
EXIT
to clear menus.
Selecting an Input to Watch
Press the
INPUT
key to select a TV input to watch. Use
the
Setup > Input
menu to rename, add, or remove
inputs from the list.
TV I nputs
