Mitsubishi Electric AJ65BT-RPI-10A, Руководство пользователя

Страница: 32 / 54

17
3.5 List of I/O Signals from/to the Master Module
The following tables provide the I/O signals transferred from/to the
master module when the monitor function is used in the AJ65BT-RPI-
10A/10B.
Refer to Chapter 5 for details of the monitor function.
Refer to Section 4.3 for the definitions of the operation indicator LEDs
used to explain the signals.
(1) Input signals (AJ65BT-RPI-10A/10B to master module)
* Value based on the RC status signal (1 time).
(2) Output signals (Master module to AJ65BT-RPI-10A/10B)
* The RC, R1, R2 and R3 status signals of the mating module can be indicated
by the operation indicator LEDs of the own module using the sequence
program of the master station, ensuring ease of optical axis adjustment.
Input
Signal
Signal
Name
Description
RXn0 RC status ON indicates that the module is ready to receive data.
RXn1 R1 status
ON indicates that the allowance of the light receiving level is 1.5
times or higher *.
RXn2 R2 status
ON indicates that the allowance of the light receiving level is 2.0
times or higher *.
RXn3 R3 status
ON indicates that the allowance of the light receiving level is 2.5
times or higher *.
RXn4 to
RX(n+1)F
—— Must not be used.
Output Signal
Signal
Name
Description
Ryn0 to RYnF —— Must not be used.
RY(n+1)0 SC ON Lights up the "SC" operation indicator LED.*
RY(n+1)1 S1 ON Lights up the "S1" operation indicator LED.*
RY(n+1)2 S2 ON Lights up the "S2" operation indicator LED.*
RY(n+1)3 S2 ON Lights up the "S3" operation indicator LED.*
RY(n+1)4 to
RX(n+1)F
—— Must not be used.