Mitsubishi Electric AJ65BT-RPI-10A Скачать руководство пользователя страница 19

Страница: 19 / 54

1.3 Abbreviated names, generic names and terms

Abbreviated names, generic names and terms Description

Abbreviated names,

generic names and terms

Description

AJ65BT-RPI-10A/10B

Abbreviation of AJ65BT-RPI-10A/AJ65BT-RPI-10B type CC-Link
system space optical repeater module

AJ65SBT-RPT

Abbreviation of AJ65SBT-RPT type CC-Link system repeater (T-
junction) module.

AJ65SBT-RPS/RPG

Abbreviation of AJ65SBTRPS/AJ65SBT-RPG type CC-Link system
optical repeater module.

AJ65FBTA-RPH

Abbreviation of AJ65FBTA-RPH type CC-Link system low profile
waterproof type repeater hub module.

AJ65BTS-RPH

Abbreviation of AJ65BTS-RPH type CC-Link system spring clamp
terminal block type repeater hub module.

A module

Abbreviation of AJ65BT-RPI-10A type CC-Link system space
optical repeater module

B module

Abbreviation of AJ65BT-RPI-10B type CC-Link system space
optical repeater module

Segment

System between terminating resistances connected to each other
through cross-over cables.The conventional CC-Link system can
be said to be configured with one segment (Refer to Section 2.1.).

Master station

Station to control the data link system. One station is required for
each system.

Local station

Station which has a sequencer CPU and can communicate with the
master station and the other local stations.

Remote I/O station

Remote station processing only information in unit of bit.
(AJ65BTB1-16D, AJ65SBTB1-16D, AJ65SBTB1-8



, etc.)

Remote device station

Remote station processing only information in unit of bit and in unit
of word.(AJ65BT-64AD, AJ65BT-64DAV, AJ65BT-64DAI, etc.)

Remote station

Generic name of remote I/O station and remote device station.
Controlled by the master station.

Intelligent device station

Station allowing transient transmission such as AJ65BT-R2.
(Including local stations)

Repeater

Module for expanding the CC-Link system by connecting the
segments to each other.

Ready master station

Backup station which inherits data link control when the master
station comes off parallel due to error.

Built-in CC-Link function

Abbreviation of built-in CC-Link system master/local functions of the
L26CPU-BT and L26CPU-PBT

Master local module

Generic name of RJ61BT11, QJ61BT11N, QJ61BT11, built-in CC-
Link function, AJ61BT11, A1SJ61BT11, AJ61QBT11, and
A1SJ61QBT11

Master module

Generic name of the master local module that is used as a master
station

Local module

Generic name of the master local module that is used as a local
station

Remote module

Generic name of AJ65BTB1-16D, AJ65SBTB1-16D,
AJ65BT-64AD, AJ65BT-64DAV, AJ65BT-64DAI and A852GOT.

Intelligent device module Module allowing transient transmission such as AJ65BT-R2.

Содержание AJ65BT-RPI-10A























































Результаты поиска

Содержание AJ65BT-RPI-10A

Отзывы:

Похожие инструкции для AJ65BT-RPI-10A

Бренды по названию

Популярные бренды

Mitsubishi Electric AJ65BT-RPI-10A, Руководство пользователя

Результаты поиска

Содержание AJ65BT-RPI-10A

Отзывы:

Похожие инструкции для AJ65BT-RPI-10A

Бренды по названию

Популярные бренды