Mitsubishi Electric A800 Plus Series, Руководство по эксплуатации функций

Страница: 11 / 242

Parameter list (by parameter number)
10
PARAMETER LIST
2
PARAMETER LIST
2.1
Parameter list (by parameter number)
For simple variable-speed operation of the inverter, the initial values of the parameters may be used as they are. Set the
necessary parameters to meet the load and operational specifications. Parameter's setting, change and check can be made
on the operation panel (FR-DU08).
NOTE
• indicates simple mode parameters. Use Pr.160 User group read selection to indicate the simple mode parameters
only (initial setting is to indicate the extended mode parameters).
• The changing of the parameter settings may be restricted in some operating statuses. Use Pr.77 Parameter write selection
to change the setting of the restriction.
• Refer to page 217 for instruction codes for communication and availability of Parameter clear, all clear, and Parameter copy.
Pr.
Pr.
group
Name Setting range
Minimum
setting
increments
Initial value Refer
to
page
Customer
setting FM CA
0 G000
Torque boost
0 to 30% 0.1%
6%
∗1
─
∗17
4%
∗1
3%
∗1
2%
∗1
1%
∗1
1 H400 Maximum frequency 0 to 120 Hz 0.01 Hz
120 Hz
∗2
─
∗17
60 Hz
∗3
2 H401
Minimum frequency
0 to 120 Hz 0.01 Hz 0 Hz ─
∗17
3 G001
Base frequency
0 to 590 Hz 0.01 Hz 60 Hz 50 Hz ─
∗17
4 D301
Multi-speed setting (high
speed)
0 to 590 Hz 0.01 Hz 60 Hz 50 Hz ─
∗17
5 D302
Multi-speed setting (middle
speed)
0 to 590 Hz 0.01 Hz 30 Hz ─
∗17
6 D303
Multi-speed setting (low
speed)
0 to 590 Hz 0.01 Hz 10 Hz ─
∗17
7 F010 Acceleration time 0 to 3600 s 0.1 s
5 s
∗4
─
∗17
15 s
∗5
8 F011
Deceleration time
0 to 3600 s 0.1 s
5 s
∗4
─
∗17
15 s
∗5
9 H000
Electronic thermal O/L
relay 0 to 500 A
∗2
0.01 A
∗2
Inverter rated
current
─
∗17
0 to 3600 A
∗3
0.1 A
∗3
10 G100
DC injection brake operation
frequency
0 to 120 Hz, 9999 0.01 Hz 3 Hz ─
∗17
11 G101
DC injection brake operation
time
0 to 10 s, 8888 0.1 s 0.5 s ─
∗17
12 G110
DC injection brake operation
voltage
0 to 30% 0.1%
4%
∗6
─
∗17
2%
∗6
1%
∗6
13 F102 Starting frequency 0 to 60 Hz 0.01 Hz 0.5 Hz ─
∗17
14 G003 Load pattern selection 0 to 5, 12 to 15 1 0 ─
∗17
15 D200 Jog frequency 0 to 590 Hz 0.01 Hz 5 Hz ─
∗17
16 F002
Jog acceleration/deceleration
time
0 to 3600 s 0.1 s 0.5 s ─
∗17
17 T720 MRS input selection 0, 2, 4 1 0 ─
∗17
18 H402 High speed maximum frequency 0 to 590 Hz 0.01 Hz
120 Hz
∗2
─
∗17
60 Hz
∗3
19 G002 Base frequency voltage 0 to 1000 V, 8888, 9999 0.1 V 9999 8888 ─
∗17
20 F000
Acceleration/deceleration
reference frequency
1 to 590 Hz 0.01 Hz 60 Hz 50 Hz ─
∗17
21 F001
Acceleration/deceleration time
increments
0, 1 1 0 ─
∗17
22 H500
Stall prevention operation level
(Torque limit level)
0 to 400% 0.1% 150% ─
∗17
Simple Simple Simple
Simple Simple Simple
Simple Simple Simple
Simple Simple Simple
Simple Simple Simple
Simple Simple Simple
Simple Simple Simple
Simple Simple Simple
Simple Simple Simple
Simple Simple Simple
Simple Simple Simple